Hello,
I'm trying to use the 3-way conference feature on a Cisco 8961 (which is extremely similar to the 9951 and 9971) but I'm having some trouble, i.e. it's not working.
First, I need to mention that I'm actually doing my test on a standalone Asterisk, and not a trixbox, but since this forum is where I found the most information about configuring Cisco 8900/9900 (http://www.fonality.com/trixbox/forums/trixbox-forums/trixbox-end...), I'm asking this question here, and I hope this is fine with everyone.
With that said, the problem is, when I press the conference button on the phone, then call another phone and then press the "conference softkey", here's what I get in the Asterisk console:
<--- SIP read from 10.97.0.204:49155 ---> REFER sip:10.97.0.130 SIP/2.0 Via: SIP/2.0/UDP 10.97.0.204:5060;branch=z9hG4bK40d50df7 From: "user301" <sip:user301@10.97.0.204>;tag=04c5a4b1670c000b181935dc-29fa7621 To: <sip:10.97.0.130> Call-ID: 04c5a4b1-670c0004-46575052-76b8a35b@10.97.0.204 Date: Wed, 18 May 2011 17:16:30 GMT CSeq: 1000 REFER User-Agent: Cisco-CP8961/9.1.1 Accept: application/x-cisco-remotecc-response+xml Expires: 60 Max-Forwards: 70 Contact: <sip:user301@10.97.0.204:5060;transport=UDP> Referred-By: "user301" <sip:user301@10.97.0.204> Refer-To: cid:2ff74357@10.97.0.204 Content-Id: <2ff74357@10.97.0.204> Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE Content-Length: 957 Content-Type: application/x-cisco-remotecc-request+xml Content-Disposition: session;handling=required <?xml version="1.0" encoding="UTF-8"?> <x-cisco-remotecc-request> <softkeyeventmsg> <softkeyevent>Conference</softkeyevent> <dialogid> <callid>04c5a4b1-670c0007-5f8a9cb6-16aebcf7@10.97.0.204</callid> <localtag>04c5a4b1670c00091e205150-11819447</localtag> <remotetag>as30619134</remotetag> </dialogid> <linenumber>0</linenumber> <participantnum>0</participantnum> <consultdialogid> <callid>04c5a4b1-670c0008-4d7b96f4-79ac1902@10.97.0.204</callid> <localtag>04c5a4b1670c000a52931d6d-7dce8539</localtag> <remotetag>as445fda71</remotetag> </consultdialogid> <state>false</state> <joindialogid> <callid></callid> <localtag></localtag> <remotetag></remotetag> </joindialogid> <eventdata> <invocationtype>explicit</invocationtype> </eventdata> <userdata></userdata> <softkeyid>0</softkeyid> <applicationid>0</applicationid> </softkeyeventmsg> </x-cisco-remotecc-request> <-------------> [May 18 13:16:30] --- (19 headers 30 lines) --- [May 18 13:16:30] Sending to 10.97.0.204 : 5060 (no NAT) [May 18 13:16:30] <--- Transmitting (no NAT) to 10.97.0.204:5060 ---> SIP/2.0 603 Declined (no dialog) Via: SIP/2.0/UDP 10.97.0.204:5060;branch=z9hG4bK40d50df7;received=10.97.0.204 From: "user301" <sip:user301@10.97.0.204>;tag=04c5a4b1670c000b181935dc-29fa7621 To: <sip:10.97.0.130>;tag=as59b48594 Call-ID: 04c5a4b1-670c0004-46575052-76b8a35b@10.97.0.204 CSeq: 1000 REFER User-Agent: Asterisk Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO Supported: replaces Content-Length: 0 <------------> [May 18 13:16:30] <--- SIP read from 10.97.0.204:49154 ---> REFER sip:10.97.0.130 SIP/2.0 Via: SIP/2.0/UDP 10.97.0.204:5060;branch=z9hG4bK172bea56 From: "user301" <sip:user301@10.97.0.130>;tag=04c5a4b1670c000c7d72da4b-0f14b10e To: <sip:300@10.97.0.130> Call-ID: OutOfDialog--0009-1568980c-4498cce9@10.97.0.204 Max-Forwards: 70 Date: Wed, 18 May 2011 17:16:30 GMT CSeq: 101 REFER User-Agent: Cisco-CP8961/9.1.1 Contact: <sip:user301@10.97.0.204:5060;transport=udp> Referred-By: "user301" <sip:user301@10.97.0.130> Refer-To: cid:7b415f84@10.97.0.204 Require: norefersub Content-Length: 953 Content-Type: application/x-cisco-remotecc-request+xml Content-Disposition: session;handling=required Content-Id: <7b415f84@10.97.0.204> <?xml version="1.0" encoding="UTF-8"?> <x-cisco-remotecc-request> <softkeyeventmsg> <softkeyevent>Cancel</softkeyevent> <dialogid> <callid>04c5a4b1-670c0007-5f8a9cb6-16aebcf7@10.97.0.204</callid> <localtag>04c5a4b1670c00091e205150-11819447</localtag> <remotetag>as30619134</remotetag> </dialogid> <linenumber>0</linenumber> <participantnum>0</participantnum> <consultdialogid> <callid>04c5a4b1-670c0008-4d7b96f4-79ac1902@10.97.0.204</callid> <localtag>04c5a4b1670c000a52931d6d-7dce8539</localtag> <remotetag>as445fda71</remotetag> </consultdialogid> <state>false</state> <joindialogid> <callid></callid> <localtag></localtag> <remotetag></remotetag> </joindialogid> <eventdata> <invocationtype>implicit</invocationtype> </eventdata> <userdata></userdata> <softkeyid>0</softkeyid> <applicationid>0</applicationid> </softkeyeventmsg> </x-cisco-remotecc-request> <-------------> [May 18 13:16:30] --- (17 headers 30 lines) --- [May 18 13:16:30] Sending to 10.97.0.204 : 5060 (no NAT) [May 18 13:16:30] <--- Transmitting (no NAT) to 10.97.0.204:5060 ---> SIP/2.0 603 Declined (no dialog) Via: SIP/2.0/UDP 10.97.0.204:5060;branch=z9hG4bK172bea56;received=10.97.0.204 From: "user301" <sip:user301@10.97.0.130>;tag=04c5a4b1670c000c7d72da4b-0f14b10e To: <sip:300@10.97.0.130>;tag=as3653aa78 Call-ID: OutOfDialog--0009-1568980c-4498cce9@10.97.0.204 CSeq: 101 REFER User-Agent: Asterisk Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO Supported: replaces Content-Length: 0
I've tried setting the remoteCcEnable parameter to false (i.e. <remoteCcEnable>false</remoteCcEnable>), with the same result. Am I doing something wrong ? Could anyone help me on that ?
Thanks
Member Since:
2011-05-18