Home » Forums » trixbox CE development Forum » FAX Development

hylafax question

drcnet
Posts: 107
 Member Since:
2006-09-10
Submitted by drcnet on Fri, 06/25/2010 - 1:13am.

My TB server has N.1 Sangoma A200 card with an FXO module connected to a single PSTN line.
Each inbound (voice) call is actually directed to the IVR that route the caller to the right extension.
I'd like to add FAX capabilities to my TB installation.
But I've very confused on this question:
I've read that Hylafax is the best FAX solution but I haven't understood if installing Hylafax is possible to configure the entire system so that it can automatically discriminate between voice and FAX inbound calls.
In fact, if the inbound call is a voice call, then the IVR must start regularly but if it isn't a voice call and is a FAX the IVR don't must start and the call must be treated as a FAX by the system.
In other words, having only one PSTN line is possible to share it between voice and FAX mantaing the IVR and without any issue ?
Thanks in advance

‹ Multiple incoming faxes with HylaFAX and IAXModem T.38 Faxing ›


liux
Posts: 58
 Member Since:
2006-12-06
Hylafax discrimination
Sat, 06/26/2010 - 5:10am

You've nothing to worry about as Fax / Voice discrimination is handled automatically, so both can reside comfortably. You can find a lot of posts regarding the proper comfiguration including a wiki.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.