2.2.4, zaptel module is not installing

I have tried "rebuild_zaptel" for many times but the same problem is continuing.I think the problem is on 2.2.4

I dont know how to rebuild it from source.How can I do that?

Could you explain me what should I do for rebuild it from source?Thanks again...

I have a x100p fxo card.I setup trixbox 2.2.4 and I hsve typed "rebuild_zaptel" to setup my card.But it gives this errors;

STOPPING FOP SERVER
FOP Server Stopped
Unloading zaptel hardware drivers:
Unloading ztdummy: ERROR: Module ztdummy does not exist in /proc/modules
[FAILED]
Unloading wctdm: ERROR: Module wctdm does not exist in /proc/modules
[FAILED]
Unloading wcfxo: ERROR: Module wcfxo does not exist in /proc/modules
[FAILED]
Unloading wcte11xp: ERROR: Module wcte11xp does not exist in /proc/modules
[FAILED]
Unloading wct1xxp: ERROR: Module wct1xxp does not exist in /proc/modules
[FAILED]
Unloading wct4xxp: ERROR: Module wct4xxp does not exist in /proc/modules
[FAILED]
Unloading tor2: ERROR: Module tor2 does not exist in /proc/modules
[FAILED]
Removing zaptel module: ERROR: Module zaptel does not exist in /proc/modules
[FAILED]
-------------------------------------------
Kernel setup
-------------------------------------------
Kernel version: 2.6.9-34.0.2.EL
Kernel directory: 2.6.9-34.0.2.EL-i686
Modules directory: /lib/modules/2.6.9-34.0.2.EL/extra

-----------------------------------------------------
Seting up links to kernel sources
-----------------------------------------------------

ln: `/usr/src/linux': File exists
ls: linux: No such file or directory
Link linux:
ln: `/usr/src/linux-2.6': File exists
ls: linux-2.6: No such file or directory
Link linux-2.6:
/usr/local/sbin/rebuild_zaptel: line 57: cd: /usr/src/zaptel: No such file or directory
make: *** No rule to make target `install-udev'. Stop.
make: *** No rule to make target `clean'. Stop.
make: *** No rule to make target `linux26'. Stop.
make: *** No rule to make target `zttool'. Stop.
make: *** No rule to make target `install'. Stop.
Loading zaptel framework: FATAL: Module zaptel not found.
[FAILED]

SETTING FILE PERMISSIONS
Permissions OK

STARTING ASTERISK
Set to realtime thread
Running as group 'asterisk'
Running as user 'asterisk'
Asterisk 1.2.23, Copyright (C) 1999 - 2007 Digium, Inc. and others.
Created by Mark Spencer
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'show license' for details.
=========================================================================
Asterisk Event Logger Started /var/log/asterisk/event_log
Asterisk Dynamic Loader loading preload modules:
Asterisk Management interface listening on port 5038
Asterisk PBX Core Initializing
Registering builtin applications:
[AbsoluteTimeout]
[Answer]
[BackGround]
[Busy]
[Congestion]
[DigitTimeout]
[Goto]
[GotoIf]
[GotoIfTime]
[ExecIfTime]
[Hangup]
[NoOp]
[Progress]
[ResetCDR]
[ResponseTimeout]
[Ringing]
[SayNumber]
[SayDigits]
[SayAlpha]
[SayPhonetic]
[SetAccount]
[SetAMAFlags]
[SetGlobalVar]
[SetLanguage]
[Set]
[SetVar]
[ImportVar]
[Wait]
[WaitExten]
Asterisk Dynamic Loader Starting:
[format_wav.so] => (Microsoft WAV format (8000hz Signed Linear))
[format_pcm.so] => (Raw uLaw 8khz Audio support (PCM))
[format_au.so] => (Sun Microsystems AU format (signed linear))
[format_mp3.so] => (MP3 format [Any rate but 8000hz mono optimal])
[res_musiconhold.so] => (Music On Hold Resource)
[res_monitor.so] => (Call Monitoring Resource)
[res_speech.so] => (Generic Speech Recognition API)
[res_features.so] => (Call Features Resource)
[res_agi.so] => (Asterisk Gateway Interface (AGI))
[res_config_mysql.so] => (MySQL RealTime Configuration Driver)
MySQL RealTime driver loaded.
[res_adsi.so] => (ADSI Resource)
[res_config_odbc.so] => (ODBC Configuration)
res_config_odbc loaded.
[res_indications.so] => (Indications Configuration)
[res_odbc.so] => (ODBC Resource)
[res_crypto.so] => (Cryptographic Digital Signatures)
[pbx_dundi.so] => (Distributed Universal Number Discovery (DUNDi))
[pbx_ael.so] => (Asterisk Extension Language Compiler)
[pbx_realtime.so] => (Realtime Switch)
[pbx_functions.so] => (Builtin dialplan functions)
[pbx_spool.so] => (Outgoing Spool Support)
[pbx_config.so] => (Text Extension Configuration)
[pbx_loopback.so] => (Loopback Switch)
[chan_agent.so] => (Agent Proxy Channel)
[chan_local.so] => (Local Proxy Channel)
[chan_h323.so] => (Objective Systems H323 Channel)
[chan_sip.so] => (Session Initiation Protocol (SIP))
[chan_iax2.so] => (Inter Asterisk eXchange (Ver 2))
[skipping chan_alsa.so]
[chan_mgcp.so] => (Media Gateway Control Protocol (MGCP))
[skipping chan_oss.so]
[chan_phone.so] => (Linux Telephony API Support)
[chan_zap.so] => (Zapata Telephony w/PRI)
[chan_features.so] => (Feature Proxy Channel)
[chan_skinny.so] => (Skinny Client Control Protocol (Skinny))
[app_echo.so] => (Simple Echo Application)
[func_callerid.so] => (Caller ID related dialplan function)
[app_externalivr.so] => (External IVR Interface Application)
[app_mp3.so] => (Silly MP3 Application)
[app_curl.so] => (Load external URL)
[app_senddtmf.so] => (Send DTMF digits Application)
[app_rxfax.so] => (Trivial FAX Receive Application)
[app_transfer.so] => (Transfer)
[app_enumlookup.so] => (ENUM Lookup)
[codec.so] => (G729/PCM16 (signed linear) Codec Translator, based on IPP)
[app_record.so] => (Trivial Record Application)
[app_sms.so] => (SMS/PSTN handler)
[format_pcm_alaw.so] => (Raw aLaw 8khz PCM Audio support)
[app_groupcount.so] => (Group Management Routines)
[codec_gsm.so] => (GSM/PCM16 (signed linear) Codec Translator)
[codec_g726.so] => (ITU G.726-32kbps G726 Transcoder)
[app_alarmreceiver.so] => (Alarm Receiver for Asterisk)
[app_setcidname.so] => (Set CallerID Name)
[app_chanisavail.so] => (Check channel availability)
[format_wav_gsm.so] => (Microsoft WAV format (Proprietary GSM))
[app_chanspy.so] => (Listen to the audio of an active channel)
[app_eval.so] => (Reevaluates strings)
[app_ices.so] => (Encode and Stream via icecast and ices)
[codec_lpc10.so] => (LPC10 2.4kbps (signed linear) Voice Coder)
[app_db.so] => (Database Access Functions)
[app_disa.so] => (DISA (Direct Inward System Access) Application)
[app_zapras.so] => (Zap RAS Application)
[app_directory.so] => (Extension Directory)
[app_readfile.so] => (Stores output of file into a variable)
[app_dial.so] => (Dialing Application)
[app_milliwatt.so] => (Digital Milliwatt (mu-law) Test Application)
[app_directed_pickup.so] => (Directed Call Pickup Application)
[app_setcdruserfield.so] => (CDR user field apps)
[app_privacy.so] => (Require phone number to be entered, if no CallerID sent)
[app_verbose.so] => (Send verbose output)
[format_g726.so] => (Raw G.726 (16/24/32/40kbps) data)
[app_controlplayback.so] => (Control Playback Application)
[app_test.so] => (Interface Test Application)
[codec_ulaw.so] => (Mu-law Coder/Decoder)
[app_lookupblacklist.so] => (Look up Caller*ID name/number from blacklist database)
[format_vox.so] => (Dialogic VOX (ADPCM) File Format)
[codec_a_mu.so] => (A-law and Mulaw direct Coder/Decoder)
[app_dumpchan.so] => (Dump Info About The Calling Channel)
[app_waitforring.so] => (Waits until first ring after time)
[format_g729.so] => (Raw G729 data)
[app_queue.so] => (True Call Queueing)
[app_nbscat.so] => (Silly NBS Stream Application)
[format_gsm.so] => (Raw GSM data)
[app_cut.so] => (Cut out information from a string)
[app_softhangup.so] => (Hangs up the requested channel)
[app_zapateller.so] => (Block Telemarketers with Special Information Tone)
[app_flash.so] => (Flash zap trunk application)
[app_macro.so] => (Extension Macros)
[app_sayunixtime.so] => (Say time)
[app_hasnewvoicemail.so] => (Indicator for whether a voice mailbox has messages in a given folder.)
[codec_ilbc.so] => (iLBC/PCM16 (signed linear) Codec Translator)
[codec_speex.so] => (Speex/PCM16 (signed linear) Codec Translator)
[app_addon_sql_mysql.so] => (Simple Mysql Interface)
[app_math.so] => (Basic Math Functions)
[app_parkandannounce.so] => (Call Parking and Announce Application)
[codec_zap.so] => (Generic Zaptel Transcoder Codec Translator)
[codec_alaw.so] => (A-law Coder/Decoder)
[app_zapscan.so] => (Scan Zap channels application)
[app_exec.so] => (Executes applications)
[app_url.so] => (Send URL Applications)
[app_stack.so] => (Stack Routines)
[app_txtcidname.so] => (TXT

Yes I tried it of course ;
But I can only see : " pseudo from-zaptel en"

log;
[FAILED]
Unloading wct4xxp: ERROR: Module wct4xxp does not exist in /proc/modules
[FAILED]
Unloading tor2: ERROR: Module tor2 does not exist in /proc/modules
[FAILED]
Removing zaptel module: ERROR: Module zaptel does not exist in /proc/modules
[FAILED]
Loading zaptel framework: FATAL: Module zaptel not found.
[FAILED]

SETTING FILE PERMISSIONS
Permissions OK

STARTING ASTERISK
Set to realtime thread
Running as group 'asterisk'
Running as user 'asterisk'
Asterisk 1.2.23, Copyright (C) 1999 - 2007 Digium, Inc. and others.
Created by Mark Spencer
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'show license' for details.
=========================================================================
Asterisk Event Logger Started /var/log/asterisk/event_log
Asterisk Dynamic Loader loading preload modules:
Asterisk Management interface listening on port 5038
Asterisk PBX Core Initializing
Registering builtin applications:
[AbsoluteTimeout]
[Answer]
[BackGround]
[Busy]
[Congestion]
[DigitTimeout]
[Goto]
[GotoIf]
[GotoIfTime]
[ExecIfTime]
[Hangup]
[NoOp]
[Progress]
[ResetCDR]
[ResponseTimeout]
[Ringing]
[SayNumber]
[SayDigits]
[SayAlpha]
[SayPhonetic]
[SetAccount]
[SetAMAFlags]
[SetGlobalVar]
[SetLanguage]
[Set]
[SetVar]
[ImportVar]
[Wait]
[WaitExten]
Asterisk Dynamic Loader Starting:
[format_wav.so] => (Microsoft WAV format (8000hz Signed Linear))
[format_pcm.so] => (Raw uLaw 8khz Audio support (PCM))
[format_au.so] => (Sun Microsystems AU format (signed linear))
[format_mp3.so] => (MP3 format [Any rate but 8000hz mono optimal])
[res_musiconhold.so] => (Music On Hold Resource)
[res_monitor.so] => (Call Monitoring Resource)
[res_speech.so] => (Generic Speech Recognition API)
[res_features.so] => (Call Features Resource)
[res_agi.so] => (Asterisk Gateway Interface (AGI))
[res_config_mysql.so] => (MySQL RealTime Configuration Driver)
MySQL RealTime driver loaded.
[res_adsi.so] => (ADSI Resource)
[res_config_odbc.so] => (ODBC Configuration)
res_config_odbc loaded.
[res_indications.so] => (Indications Configuration)
[res_odbc.so] => (ODBC Resource)
[res_crypto.so] => (Cryptographic Digital Signatures)
[pbx_dundi.so] => (Distributed Universal Number Discovery (DUNDi))
[pbx_ael.so] => (Asterisk Extension Language Compiler)
[pbx_realtime.so] => (Realtime Switch)
[pbx_functions.so] => (Builtin dialplan functions)
[pbx_spool.so] => (Outgoing Spool Support)
[pbx_config.so] => (Text Extension Configuration)
[pbx_loopback.so] => (Loopback Switch)
[chan_agent.so] => (Agent Proxy Channel)
[chan_local.so] => (Local Proxy Channel)
[chan_h323.so] => (Objective Systems H323 Channel)
[chan_sip.so] => (Session Initiation Protocol (SIP))
[chan_iax2.so] => (Inter Asterisk eXchange (Ver 2))
[skipping chan_alsa.so]
[chan_mgcp.so] => (Media Gateway Control Protocol (MGCP))
[skipping chan_oss.so]
[chan_phone.so] => (Linux Telephony API Support)
[chan_zap.so] => (Zapata Telephony w/PRI)
[chan_features.so] => (Feature Proxy Channel)
[chan_skinny.so] => (Skinny Client Control Protocol (Skinny))
[app_echo.so] => (Simple Echo Application)
[func_callerid.so] => (Caller ID related dialplan function)
[app_externalivr.so] => (External IVR Interface Application)
[app_mp3.so] => (Silly MP3 Application)
[app_curl.so] => (Load external URL)
[app_senddtmf.so] => (Send DTMF digits Application)
[app_rxfax.so] => (Trivial FAX Receive Application)
[app_transfer.so] => (Transfer)
[app_enumlookup.so] => (ENUM Lookup)
[codec.so] => (G729/PCM16 (signed linear) Codec Translator, based on IPP)
[app_record.so] => (Trivial Record Application)
[app_sms.so] => (SMS/PSTN handler)
[format_pcm_alaw.so] => (Raw aLaw 8khz PCM Audio support)
[app_groupcount.so] => (Group Management Routines)
[codec_gsm.so] => (GSM/PCM16 (signed linear) Codec Translator)
[codec_g726.so] => (ITU G.726-32kbps G726 Transcoder)
[app_alarmreceiver.so] => (Alarm Receiver for Asterisk)
[app_setcidname.so] => (Set CallerID Name)
[app_chanisavail.so] => (Check channel availability)
[format_wav_gsm.so] => (Microsoft WAV format (Proprietary GSM))
[app_chanspy.so] => (Listen to the audio of an active channel)
[app_eval.so] => (Reevaluates strings)
[app_ices.so] => (Encode and Stream via icecast and ices)
[codec_lpc10.so] => (LPC10 2.4kbps (signed linear) Voice Coder)
[app_db.so] => (Database Access Functions)
[app_disa.so] => (DISA (Direct Inward System Access) Application)
[app_zapras.so] => (Zap RAS Application)
[app_directory.so] => (Extension Directory)
[app_readfile.so] => (Stores output of file into a variable)
[app_dial.so] => (Dialing Application)
[app_milliwatt.so] => (Digital Milliwatt (mu-law) Test Application)
[app_directed_pickup.so] => (Directed Call Pickup Application)
[app_setcdruserfield.so] => (CDR user field apps)
[app_privacy.so] => (Require phone number to be entered, if no CallerID sent)
[app_verbose.so] => (Send verbose output)
[format_g726.so] => (Raw G.726 (16/24/32/40kbps) data)
[app_controlplayback.so] => (Control Playback Application)
[app_test.so] => (Interface Test Application)
[codec_ulaw.so] => (Mu-law Coder/Decoder)
[app_lookupblacklist.so] => (Look up Caller*ID name/number from blacklist database)
[format_vox.so] => (Dialogic VOX (ADPCM) File Format)
[codec_a_mu.so] => (A-law and Mulaw direct Coder/Decoder)
[app_dumpchan.so] => (Dump Info About The Calling Channel)
[app_waitforring.so] => (Waits until first ring after time)
[format_g729.so] => (Raw G729 data)
[app_queue.so] => (True Call Queueing)
[app_nbscat.so] => (Silly NBS Stream Application)
[format_gsm.so] => (Raw GSM data)
[app_cut.so] => (Cut out information from a string)
[app_softhangup.so] => (Hangs up the requested channel)
[app_zapateller.so] => (Block Telemarketers with Special Information Tone)
[app_flash.so] => (Flash zap trunk application)
[app_macro.so] => (Extension Macros)
[app_sayunixtime.so] => (Say time)
[app_hasnewvoicemail.so] => (Indicator for whether a voice mailbox has messages in a given folder.)
[codec_ilbc.so] => (iLBC/PCM16 (signed linear) Codec Translator)
[codec_speex.so] => (Speex/PCM16 (signed linear) Codec Translator)
[app_addon_sql_mysql.so] => (Simple Mysql Interface)
[app_math.so] => (Basic Math Functions)
[app_parkandannounce.so] => (Call Parking and Announce Application)
[codec_zap.so] => (Generic Zaptel Transcoder Codec Translator)
[codec_alaw.so] => (A-law Coder/Decoder)
[app_zapscan.so] => (Scan Zap channels application)
[app_exec.so] => (Executes applications)
[app_url.so] => (Send URL Applications)
[app_stack.so] => (Stack Routines)
[app_txtcidname.so] => (TXTCIDName)
[app_cdr.so] => (Tell Asterisk to not maintain a CDR for the current call)
[format_ilbc.so] => (Raw iLBC data)
[app_setcidnum.so] => (Set CallerID Number)
[app_playback.so] => (Sound File Playback Application)
[cdr_csv.so] => (Comma Separated Values CDR Backend)
[app_userevent.so] => (Custom User Event Application)
[app_adsiprog.so] => (Asterisk ADSI Programming Application)
[app_flite.so] => (Flite Text-to-Speech Interface)
[skipping chan_alsa.so]
[format_sln.so] => (Raw Signed Linear Audio support (SLN))
[app_getcpeid.so] => (Get ADSI CPE ID)
[func_uri.so] => (URI encode/decode functions)
[app_lookupcidname.so] => (Look up CallerID Name from local database)
[app_talkdetect.so] => (Playback with Talk Detection)
[app_settransfercapability.so] => (Set ISDN Transfer Capability)
[app_speech_utils.so] => (Dialplan Speech Applications)
[app_mixmonitor.so] => (Mixed Audio Monitoring Application)
[app_nv_backgrounddetect.so] => (Newman's playback with talk and fax detection)
[cdr_manager.so] => (Asterisk Call Manager CDR Backend)
[app_nv_faxdetect.so] => (Newman's fax detection application)
[format_ogg_vorbis.so] => (OGG/Vorbis audio)
[format_jpeg.so] => (JPEG (Joint Picture Experts Group) Image Format)
[skipping chan_oss.so]
[app_page.so] => (Page Multiple Phones)
[app_authenticate.so] => (Authentication Application)
[app_md5.so] => (MD5 checksum applications)
[codec_adpcm.so] => (Adaptive Differential PCM Coder/Decoder)
[app_realtime.so] => (Realtime Data Lookup/Rewrite)
[app_forkcdr.so] => (Fork The CDR into 2 separate entities.)
[app_while.so] => (While Loops and Conditional Execution)
[app_saycountpl.so] => (Say polish counting words)
[app_image.so] => (Image Transmission Application)
[cdr_custom.so] => (Customizable Comma Separated Values CDR Backend)
[app_waitforsilence.so] => (Wait For Silence)
[app_dictate.so] => (Virtual Dictation Machine)
[app_txfax.so] => (Trivial FAX Transmit Application)
[format_g723.so] => (G.723.1 Simple Timestamp File Format)
[format_h263.so] => (Raw h263 data)
[app_read.so] => (Read Variable Application)
[func_enum.so] => (ENUM Related Functions)
[app_setrdnis.so] => (Set RDNIS Number)
[app_festival.so] => (Simple Festival Interface)
[app_setcallerid.so] => (Set CallerID Application)
[app_system.so] => (Generic System() application)
[cdr_addon_mysql.so] => (MySQL CDR Backend)
[app_meetme.so] => (MeetMe conference bridge)
[app_zapbarge.so] => (Barge in on Zap channel application)
[app_sendtext.so] => (Send Text Applications)
[app_random.so] => (Random goto)
[app_voicemail.so] => (Comedian Mail (Voicemail System))
Asterisk Ready.
Asterisk Started

STARTING FOP SERVER
FOP Server Started
Chan Extension Context Language MusicOnHold
pseudo from-zaptel en
Verbosity is at least 1

Yes I can see it
[root@asterisk1 ~]# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 23)
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
00:04.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 11)
00:04.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 30)
00:0b.0 Communication controller: Motorola Wildcard X100P
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: S3 Inc. 86c794 [Savage 3D] (rev 01)

[root@asterisk1 ~]# cat /proc/interrupts
CPU0
0: 102291086 XT-PIC timer
1: 639 XT-PIC i8042
2: 0 XT-PIC cascade
8: 0 XT-PIC rtc
11: 694051 XT-PIC eth0
12: 0 XT-PIC uhci_hcd
14: 116901 XT-PIC ide0
15: 694 XT-PIC ide1
NMI: 0
ERR: 0

Fresh install of 2.2.4 and I echo the above statements about TDM not detecting. cat /proc/interrupts is only going to show you interrupts of hardware where the device is properly loaded and in this case, the device isn't loading.

lspci properly shows detected hardware as Tiger jet Network Inc. Tiger3XX Modem/ISDN interface.

I've tried moving to another slot; but that produced no change.

This only occurs with 2.2.4. Hardware had working version of 2.0 w/updates.

I changed the port but the same problem is continuing...
While starting computer it writes; Loading zaptel framework: FATAL: Module zaptel not found.
Should I install another package instead of zaptel.i586 and zaptel-modules-2.6.9-34.0.2.ELsmp.i586?

me too!
I check "$cat /root/install.log | grep zap". It not found any Zaptel install.
also "$modprobe -l" no any zaptel module

May the problem from Installation?

*=-=**=-=**=-=**=-=**=-=**=-=**=-=**=-=**=-=*
http://peerasan.blogspot.com/
http://www.patrickz.eu.org/
http://www.narisa.com/blog/patrickz/
http://gotoknow.org/blog/patrickz/
*=-=**=-=**=-=**=-=**=-=**=-=**=-=**=-=**=-=*

try doing: yum install zaptel* or yum update zaptel*

rpm -del zaptel*
yum install zaptel*

We are building new zaptel modules, sometime today you should be able to do:

yum clean all
yum install zaptel*

Yes, as soon as we get this all cleared up there will be another build. We really appreciate all the help in findng these issues.

Thanks alot Kerry Garrison!
It worked:

yum clean all
yum install zaptel*

I can see the card in list;
Chan Extension Context Language MusicOnHold
pseudo from-zaptel en
1 from-zaptel en
Verbosity is at least 1

I would not do yum install zaptel*

You only load the version you wish to use.

Like yum -y install zaptel-echo_oslec-modules-2.6.9-34.0.2.E 1.2.19-2

Depending on your setup

I had to run genzaptelconf 3 times after I did the

yum clean all
yum install zaptel*
for trixbox to finally install the cards correctly.

Hi,
I have done both rpm -del zapata --nodep and yum clean all, yum install zapatel* but still my card isn't recognized by genzaptelconf. I have both a Phoniceq QuadBri card and a Wildcard TDM400. I have swapped PCI slots (only two available) and changed IRQ in BIOS.
After manually editing /etc/zaptel.com I get:

cat /proc/interrupts shows:
CPU0
0: 11557942 XT-PIC timer
1: 8 XT-PIC i8042
2: 0 XT-PIC cascade
5: 719842 XT-PIC Intel 82801BA-ICH2, HFC-multi
8: 1 XT-PIC rtc
10: 69330 XT-PIC eth0
11: 11498942 XT-PIC wctdm
14: 31435 XT-PIC ide0
NMI: 0
ERR: 0

lspci:
02:04.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)
Subsystem: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S]
Flags: medium devsel, IRQ 5
I/O ports at 1440 [size=8]
Memory at fe400000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [40] Power Management version 2

02:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: Unknown device b100:0003
Flags: bus master, medium devsel, latency 66, IRQ 11
I/O ports at 1000 [size=256]
Memory at fe402000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2

If a make genzaptelconf -ds this is what I get:
Unknown line at line 5959
Unknown line at line 5960
Unknown line at line 5961
Unknown line at line 5962
Unknown line at line 5963
Unknown line at line 5964
Unknown line at line 5965
Unknown line at line 5966
Unknown line at line 5967
Unknown line at line 5968
Unknown line at line 5969
Unknown line at line 5970
[OK] found the following devices:
card=1,0x4
[ii] run "/usr/sbin/misdn-init config" to store this information to /etc/misdn-init.conf
Unknown line at line 5959
Unknown line at line 5960
Unknown line at line 5961
Unknown line at line 5962
Unknown line at line 5963
Unknown line at line 5964
Unknown line at line 5965
Unknown line at line 5966
Unknown line at line 5967
Unknown line at line 5968
Unknown line at line 5969
Unknown line at line 5970
[OK] /etc/misdn-init.conf already present. backing it up to /etc/misdn-init.conf.save
[OK] /etc/misdn-init.conf created. It's now safe to run "/usr/sbin/misdn-init start"
[ii] make your ports (1-4) available in asterisk by editing "/etc/asterisk/misdn.conf"
Unknown line at line 5959
Unknown line at line 5960
Unknown line at line 5961
Unknown line at line 5962
Unknown line at line 5963
Unknown line at line 5964
Unknown line at line 5965
Unknown line at line 5966
Unknown line at line 5967
Unknown line at line 5968
Unknown line at line 5969
Unknown line at line 5970
-----------------------------------------
Loading module(s) for your misdn-cards:
-----------------------------------------
/sbin/modprobe --ignore-install hfcmulti type=0x4 protocol=0x2,0x2,0x2,0x2 layermask=0xf,0xf,0xf,0xf poll=128 debug=0
/sbin/modprobe mISDN_dsp debug=0x0 options=0 poll=128 dtmfthreshold=100
Shutting down asterisk: [ OK ]
ERROR: Module wcfxs does not exist in /proc/modules
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'

1 error(s) detected

Starting asterisk: [ OK ]

Any help would be greatly appreciated.

I moved my card and I get the following references ot errors .

rxt1
r4fxo
r1t1
rcbfx

Any idea what may have happened. ? DO Ihave too many modles instsalled? I have the efax module in place and I have the iger jet Network Inc. Tiger3XX Modem/ISDN interface.

I fixed my problem. I removed the ELsmp ones, restarted, and did the rebuild zaptel command then genzaptelconfig and it is working now.

FWIW - I think the problem here is exclusive to installing 2.2.4 iso on non-SMP boxes. Anyone here fit that description? I don't think the install was tested on a non-smp box otherwise the problem would have been found right away. All the zaptel modules on the iso are for SMP kernels so that's why the rpm never gets installed or fits dependencies.

Gentlemen: It appears I have a similar problem with proc/modules for zaptel not loading. I am afraid I don't understand the missing rpms, or how to be sure to get them.

I have tried the to steps to clean and reinstall zaptel; and genzaptelconf. No luck.

I do have 2.2.3 build.

A simpler set of instructions or cookbook would help. I would rather not lose configuration files be doing a wipe and reinstall to insure all modules get loaded.

Is there a link to another forum thread that gives the steps?

Thanks in advance for any help or suggestions.

This thread helped a lot

I have put up 4 boxes now with 2.2.4 - and they are all the same - nonSMP IBM X series 3105 servers. On all 4 I had to yum install zaptel* before I could install the wanpipe and setup my Sangoma cards....

This is driving me batty (and I suspect is the root source of other problems over the past few months). I like to use fanless CPU boards that are not SMP or hyperthreaded so I think I'm hitting the same problem as others above where the zaptel drivers don't install properly and hence the digium card doesn't load (even though lspci shows it correctly).

So, per above I tried: yum list | grep zaptel and got back the list:

zaptel.i686 1.2.19-29.2831 installed
zaptel-devel.i686 1.2.19-29.2831 installed
zaptel-modules.i686 1.2.19-29.2831.2.6.9_3 installed
zaptel-modules-2.6.9-34.0.2.ELsmp.i586 1.2.19-3_SMP installed

(this was after doing the suggested yum clean all and yum install zaptel*

I don't see any of the echo cancellation options (which I don't need, but I'll take any non-SMP version at this point!) (I tried enabling all packages but no difference).

Suggestions?

(Note that the trigger for this is running genzaptelconf and getting the error:

Loading zaptel framework: FATAL: Module zaptel not found. FAILED

thx, michael

trixbox 2.2.5 resolves all of these problems. If you need to upgrade an existing system I have updated the wiki http://www.trixbox.org/wiki/zaptel-not-loading-2-2-x

rpm -del zaptel --nodeps
yum clean all
yum install zaptel*

Then did the usual yum -y update and all is well again.

dm

I am having one hell of a time with ZAPTEL driver for FXO card from X100P.com

See my steps below.

[root@asterisk1 zaptel]# yum install zaptel*
Setting up Install Process
Setting up repositories
trixbox 100% |=========================| 951 B 00:00
update 100% |=========================| 951 B 00:00
base 100% |=========================| 1.1 kB 00:00
trixboxaddons 100% |=========================| 951 B 00:00
addons 100% |=========================| 951 B 00:00
extras 100% |=========================| 1.1 kB 00:00
Reading repository metadata in from local files
Excluding Packages from CentOS-4 - Updates
Finished
Excluding Packages from CentOS-4 - Base
Finished
Excluding Packages from CentOS-4 - Addons
Finished
Excluding Packages from CentOS-4 - Extras
Finished
Parsing package install arguments
No Match for argument: zaptel.c
No Match for argument: zaptel.conf.sample
No Match for argument: zaptel.h
No Match for argument: zaptel.init
No Match for argument: zaptel.sysconfig
Nothing to do
-------------------------------------------------------

[root@asterisk1 zaptel]# yum clean all
Cleaning up Everything
0 headers removed
0 packages removed
18 metadata files removed
0 cache files removed
6 cache files removed
[root@asterisk1 zaptel]# yum install zaptel zaptel-modules-1.2.19.29.2831.2.6.9_34.0.2.EL*
Setting up Install Process
Setting up repositories
trixbox 100% |=========================| 951 B 00:00
update 100% |=========================| 951 B 00:00
base 100% |=========================| 1.1 kB 00:00
trixboxaddons 100% |=========================| 951 B 00:00
addons 100% |=========================| 951 B 00:00
extras 100% |=========================| 1.1 kB 00:00
Reading repository metadata in from local files
primary.xml.gz 100% |=========================| 48 kB 00:00
trixbox : ################################################## 125/125
Added 125 new packages, deleted 0 old in 1.92 seconds
primary.xml.gz 100% |=========================| 150 kB 00:00
update : ################################################## 483/483
Added 483 new packages, deleted 0 old in 10.16 seconds
primary.xml.gz 100% |=========================| 580 kB 00:01
base : ################################################## 1518/1518
Added 1518 new packages, deleted 0 old in 25.90 seconds
primary.xml.gz 100% |=========================| 2.7 kB 00:00
trixboxadd: ################################################## 5/5
Added 5 new packages, deleted 0 old in 0.12 seconds
primary.xml.gz 100% |=========================| 157 B 00:00
Added 0 new packages, deleted 0 old in 0.01 seconds
primary.xml.gz 100% |=========================| 61 kB 00:00
extras : ################################################## 252/252
Added 252 new packages, deleted 0 old in 3.69 seconds
Excluding Packages from CentOS-4 - Updates
Finished
Excluding Packages from CentOS-4 - Base
Finished
Excluding Packages from CentOS-4 - Addons
Finished
Excluding Packages from CentOS-4 - Extras
Finished
Parsing package install arguments
No Match for argument: zaptel-modules-1.2.19.29.2831.2.6.9_34.0.2.EL*
Nothing to do

----------------------------
[root@asterisk1 zaptel]# genzaptelconf

STOPPING ASTERISK
Executing last minute cleanups
Asterisk ended with exit status 0
Asterisk shutdown normally.
Asterisk Stopped

STOPPING FOP SERVER
FOP Server Stopped
Generating '/etc/zaptel.conf'
Generating '/etc/asterisk/zapata-auto.conf'
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'

1 error(s) detected

Unloading zaptel hardware drivers:.
Loading zaptel framework: FATAL: Module zaptel not found.
[FAILED]
Waiting for zap to come online...
----------------------------------------
[root@asterisk1 zaptel]# rpm -qa | grep zaptel-modules
zaptel-modules-2.6.9-34.0.2.ELsmp-1.2.19-3_SMP
zaptel-modules-1.2.19-29.2831.2.6.9_34.0.2.ELsmp
------------------------------------
[root@asterisk1 zaptel]# lspci
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82815 Chipset Graphics Controller (CGC) (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 11)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 11)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 11)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 11)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 11)
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 11)
00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio Controller (rev 11)
01:07.0 Communication controller: Motorola Wildcard X100P
01:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
[root@asterisk1 zaptel]#
--------------------------------

[root@asterisk1 zaptel]# cat /proc/interrupts
CPU0
0: 39810139 XT-PIC timer
1: 8 XT-PIC i8042
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
10: 0 XT-PIC Intel 82801BA-ICH2
11: 77454 XT-PIC uhci_hcd, uhci_hcd, eth0
12: 168 XT-PIC i8042
14: 69462 XT-PIC ide0
15: 2505 XT-PIC ide1
NMI: 0
ERR: 0

What else can i do to get this ZAPTEL driver installed properly for my X100P.com card.
I need to install 3 or 4 in the same box.

Help Kerryg or anyone out there please !

http://www.trixbox.org/wiki/zaptel-not-loading-2-2-x

I get this; what can I do?

---> Downloading header for zaptel-devel to pack into transaction set.
zaptel-devel-1.2.19-29.28 100% |=========================| 22 kB 00:00
---> Package zaptel-devel.i686 0:1.2.19-29.2831 set to be updated
--> Running transaction check
--> Processing Dependency: zaptel = 1.2.19 for package: zaptel-devel
--> Finished Dependency Resolution
Error: Missing Dependency: zaptel = 1.2.19 is needed by package zaptel-devel
[root@asterisk1 ~]#

I also tried wget http://yum.trixbox.org/fix/fix-zaptel.sh
chmod +x fix-zaptel.sh
./fix-zaptel.sh

with no luck. The system info correctly detect my TDM400P

This is what i get

[root@asterisk1 ~]# genzaptelconf

STOPPING ASTERISK

STOPPING FOP SERVER
Generating '/etc/zaptel.conf'
Generating '/etc/asterisk/zapata-auto.conf'
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'

1 error(s) detected

Unloading zaptel hardware drivers:.
Loading zaptel framework: FATAL: Module zaptel not found.
[FAILED]
Waiting for zap to come online...
Error: missing /dev/zap!

PCI Devices
- Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface

I'll try in a few minutes, I've sent you a private message if you like to test the Zaptel script.

This is everything I got.
Slot changed, same error, the TB worked fine before yum
the error is still:

[root@asterisk1 ~]# genzaptelconf

STOPPING ASTERISK

STOPPING FOP SERVER
Generating '/etc/zaptel.conf'
Generating '/etc/asterisk/zapata-auto.conf'
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'

1 error(s) detected

Unloading zaptel hardware drivers:.
Loading zaptel framework: FATAL: Module zaptel not found.
[FAILED]
Waiting for zap to come online...Error: missing /dev/zap!

[root@asterisk1 ~]# rpm -qa | grep zaptel
zaptel-1.2.21-1
zaptel-modules-1.2.21-1.2.6.9_34.0.2.ELsmp
[root@asterisk1 ~]# yum remove zaptel-devel-*
Setting up Remove Process
No Match for argument: zaptel-devel-*
No Packages marked for removal
[root@asterisk1 ~]# ./fix-zaptel.sh
Fix Zaptel 1.0
--------------------------------------------------
Becasue of the way modules work in the Linux kernel there can be problems with
modules RPMs. If you are getting errors when you try to update zaptel modules
this script should resolve your problems.
Upgrade zaptel RPMs?[n]y
--------------------------------------------------
Cleaning up Everything
2 headers removed
2 packages removed
18 metadata files removed
0 cache files removed
6 cache files removed
removing zaptel-1.2.21-1
warning: /etc/zaptel.conf saved as /etc/zaptel.conf.rpmsave
removing zaptel-modules-1.2.21-1.2.6.9_34.0.2.ELsmp
Setting up Install Process
Setting up repositories
trixbox 100% |=========================| 951 B 00:00
update 100% |=========================| 951 B 00:00
base 100% |=========================| 1.1 kB 00:00
trixboxaddons 100% |=========================| 951 B 00:00
addons 100% |=========================| 951 B 00:00
extras 100% |=========================| 1.1 kB 00:00
Reading repository metadata in from local files
primary.xml.gz 100% |=========================| 49 kB 00:00
trixbox : ################################################## 128/128
Added 128 new packages, deleted 0 old in 0.87 seconds
primary.xml.gz 100% |=========================| 159 kB 00:00
update : ################################################## 492/492
Added 492 new packages, deleted 0 old in 5.05 seconds
primary.xml.gz 100% |=========================| 580 kB 00:00
base : ################################################## 1518/1518
Added 1518 new packages, deleted 0 old in 12.95 seconds
primary.xml.gz 100% |=========================| 2.7 kB 00:00
trixboxadd: ################################################## 5/5
Added 5 new packages, deleted 0 old in 0.06 seconds
primary.xml.gz 100% |=========================| 157 B 00:00
Added 0 new packages, deleted 0 old in 0.01 seconds
primary.xml.gz 100% |=========================| 61 kB 00:00
extras : ################################################## 252/252
Added 252 new packages, deleted 0 old in 1.46 seconds
Excluding Packages from CentOS-4 - Updates
Finished
Excluding Packages from CentOS-4 - Base
Finished
Excluding Packages from CentOS-4 - Addons
Finished
Excluding Packages from CentOS-4 - Extras
Finished
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for zaptel-modules to pack into transaction set.
zaptel-modules-1.2.21-1.2 100% |=========================| 26 kB 00:00
---> Package zaptel-modules.i686 0:1.2.21-1.2.6.9_34.0.2.ELsmp set to be updated
---> Downloading header for zaptel to pack into transaction set.
zaptel-1.2.21-1.i686.rpm 100% |=========================| 34 kB 00:00
---> Package zaptel.i686 0:1.2.21-1 set to be updated
--> Running transaction check

Dependencies Resolved

=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
zaptel i686 1.2.21-1 trixbox 2.1 M
zaptel-modules i686 1.2.21-1.2.6.9_34.0.2.ELsmp trixbox 2.4 M

Transaction Summary
=============================================================================
Install 2 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 4.5 M
Downloading Packages:
(1/2): zaptel-modules-1.2 100% |=========================| 2.4 MB 00:06
(2/2): zaptel-1.2.21-1.i6 100% |=========================| 2.1 MB 00:05
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: zaptel ######################### [1/2]
Installing: zaptel-modules ######################### [2/2]

Installed: zaptel.i686 0:1.2.21-1 zaptel-modules.i686 0:1.2.21-1.2.6.9_34.0.2.ELsmp
Complete!
--------------------------------------------------
Zaptel problems resolved
You may need to upadte the rest of your packages using yum update.
You should reboot your system now.

I also tried before a lot of times without success

yum clean all
yum install zaptel*

Any suggestion?

by doing the following
install 2.2.4
Once finished follow the instructions in the wiki:
http://www.trixbox.org/wiki/zaptel-not-loading-2-2-x
to load the ELsmp, edit grup.conf changing default=1 to 0 and save. (I needed ELsmp for this to work).
reboot
login as root
genzaptelconf and reboot again.
Perform all updates you want BEFORE changing any passwords especially to FreePBX.
Just as a note, I wanted the 2.3.1 of FreePBX, and wasn't getting it in packages from Trixbox so went here: http://freepbx.org/support/documentation/installation/upgrading-y...
After you have finished your upgrades then change your passwords.

tk

i cant get this damn thing to work.

the sh file doesnt fix it