Home » Forums » Community Edition » Help

authtype=database won't allow log in

tlkhorses
Posts: 45
 Member Since:
2007-11-05
Submitted by tlkhorses on Wed, 07/09/2008 - 8:50pm.

If I change that to database, I cannot login to FreePBX. I am running 2.2.9 of trixbox, yes I know it is old but this is what was handed to me. Anyway, I have checked the *.conf files and all users and passwords match. With authtype set to none, I have looked at the database and tried using ampusers listed there. Still no go, the login window keeps appearing. If I have a screen open in freepbx and then change to database then amportal restart, I can still navigate in freepbx and I see logged in as user x on the right. If I log out then try to log back in, I can't.

Any clues?

tk

‹ Remote SHH Conn I can not enter into setting pbx ›

&nbsp

tlkhorses
Posts: 45
 Member Since:
2007-11-05
ideas
Wed, 07/16/2008 - 2:25pm

Anyone have any ideas on this?

tk


&nbsp

cynjut
Posts: 25
 Member Since:
2007-06-20
Re: authtype=database won't allow log in
Wed, 07/16/2008 - 2:29pm

If your database exists, use your favorite access program and open the database. Create the users you are trying to log in with (maint,admin,newbie,etc.) by adding records in the database with the correct credentials. Restart asterisk (just for grins) and try again. You should be able to get in just fine.


&nbsp

tlkhorses
Posts: 45
 Member Since:
2007-11-05
tried with existing users there
Wed, 07/16/2008 - 2:35pm

I opened the database and looked at users already there. Tried using those and didn't work.

tk


&nbsp

cynjut
Posts: 25
 Member Since:
2007-06-20
Re: tried with existing users there
Wed, 07/16/2008 - 2:42pm

You opened the ampusers database, added the users, added the passwords, and made sure the sections were set to '*' and you still can't access AMP? That was all I needed to do to solve this problem when I had it last month.

The other possibility is that you aren't using the right username/password/hostname combo to open the database. Check your /var/log/asterisk/full log file and make sure you are getting logged into the database correctly.

Also, you might be bumping into some kind of browser unhappiness. Include a restart of your browser just to make sure there isn't some weird cache thing going on.


&nbsp

tlkhorses
Posts: 45
 Member Since:
2007-11-05
acl?
Thu, 07/17/2008 - 1:23pm

Ok. looking at the log full. Is there an acl or permit/deny somewhere in one of the .conf files? This is what I found in the log (with IP addresses changed except last two in the publics to retain relevance). That is the only thing I really see reference login when I change to =database. I didn't add any users manually, the two that I tried where already in the mysql asterisk ampuser table.

Jul 17 14:54:21 DEBUG[13317] manager.c: Manager received command 'login'
Jul 17 14:54:21 DEBUG[13317] acl.c: 0.0.0.0/0.0.0.0/0.0.0.0 appended to acl for peer
Jul 17 14:54:21 DEBUG[13317] acl.c: 64.11.11.38/255.255.255.224/255.255.255.224 appended to acl for peer
Jul 17 14:54:21 DEBUG[13317] acl.c: ##### Testing 64.11.11.38 with 0.0.0.0
Jul 17 14:54:21 DEBUG[13317] acl.c: ##### Testing 64.11.11.38 with 64.11.11.32

tk


&nbsp

jfinstrom
Posts: 2013
 Member Since:
2007-03-07
https://support.rhinoequipmen
Thu, 07/17/2008 - 3:04pm

https://support.rhinoequipment.com/index.php?_m=knowledgebase&_a=...

--


&nbsp

tlkhorses
Posts: 45
 Member Since:
2007-11-05
thanks
Thu, 07/17/2008 - 3:48pm

Thanks James. I see it is for a later version than what I have but I think I will give it a try.

tk


&nbsp

hbirosel
Posts: 51
 Member Since:
2006-10-22
hello jfinstrom i folow
Mon, 07/28/2008 - 11:28am

hello jfinstrom

i folow the instruction from the link https://support.rhinoequipment.com/index.php?_m=knowledgebase&_a=...

-- but when i try to restart i got synstax error..

[trixbox1.localdomain ~]# /etc/init.d/httpd restart
Stopping httpd: [FAILED]
Starting httpd: Syntax error on line 2 of /etc/trixbox/httpdconf/trixbox.conf:
directive requires additional arguments


&nbsp

nickreadman
Posts: 58
 Member Since:
2006-10-31
Samething here!
Mon, 08/11/2008 - 7:00am

[trixbox1.localdomain ~]# /etc/init.d/httpd restart
Stopping httpd: [FAILED]
Starting httpd: Syntax error on line 1 of /etc/trixbox/httpdconf/trixbox.conf:
directive requires additional arguments
[FAILED]

Nick

--

trixbox-2.6.1.1, *-1.14.20, zaptel-1.4.10.1-2, Digium-TDM04B, Aastra & Polycom phones


&nbsp

bubbapcguy
Posts: 3774
 Member Since:
2006-06-02
admin
Mon, 08/11/2008 - 10:38am

1.) If you are doing this to allow access to the box from the net
>>>>>>>>>>>>>
STOP
>>>>>>>>>>>>>>>

TB nor Freepbx is designed for that, you will be HACKED no if ands or butts.

the freepbx site is where you go for this, the docs on the site are top notch.
TB on the other hand does it best to confuse folks, the trixbox.conf file needed to be edited to remove the folder permisson blocks.


&nbsp

nickreadman
Posts: 58
 Member Since:
2006-10-31
Thank's bubbapcguy but...
Tue, 08/12/2008 - 6:28am

The doc on the FreePBX is a cut and paste of the Rhino support site... Of course the result is the same!

http://www.freepbx.org/support/documentation/howtos/how-to-using-...

What do we do now ?

Nick

--

trixbox-2.6.1.1, *-1.14.20, zaptel-1.4.10.1-2, Digium-TDM04B, Aastra & Polycom phones


&nbsp

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.