Help! No Sound after x100p install

jonnytabpni

Posts: 379
Member Since:
2007-03-21

Submitted by jonnytabpni on Mon, 04/28/2008 - 3:06am.

Hewy folks

I got a x100p to help with my timing issues.

After installing, zttest hangs and I can't make/receive any calls on trixbox!!! (however everything is registered properly - just you can't hear any sound - not even an error tone).

I've diabled my seriel port and usb ports in my BIOS.

Please help

Cheers
[server2.ABPNI.local ~]# cat /proc/interrupts
CPU0 CPU1
0: 135941 136729 IO-APIC-edge timer
1: 3 2 IO-APIC-edge i8042
2: 0 0 XT-PIC cascade
8: 1 0 IO-APIC-edge rtc
14: 19538 10904 IO-APIC-edge ide0
15: 0 0 IO-APIC-edge libata
137: 64 20 IO-APIC-level uhci_hcd:usb1
145: 0 0 IO-APIC-level uhci_hcd:usb2
153: 38 2251 IO-APIC-level libata
161: 62 74 IO-APIC-level wcfxo
209: 65 1666 PCI-MSI eth0
NMI: 1 0
LOC: 257434 263192
ERR: 0
MIS: 0
[server2.ABPNI.local ~]#

&nbsp

jonnytabpni

Posts: 379
Member Since:
2007-03-21

ok anything that requires

Mon, 04/28/2008 - 3:24am

ok anything that requires timing doesn't work anymore!

i.e. playback, transcoding

however non-transcoding, non-playback (i.e. a trunk) streams work.

please help

&nbsp

joshpatten

Posts: 733
Member Since:
2007-01-20

I have run into this problem

Mon, 04/28/2008 - 7:39am

I have run into this problem on a 64 bit 1.6GHz dual core intel processor HP dx2300 computer. It seems when I load the zaptel drivers, that no sounds will work at all. This is the only computer I have had an issue with. You can try various kernel tricks listed in various places on this site, but I couldn't get any of them to work and eventually just moved the whole installation to a different computer.

&nbsp

jahyde

Posts: 2002
Member Since:
2006-06-02

161 - thats a really bad IRQ

Mon, 04/28/2008 - 8:44am

161 - thats a really bad IRQ for a card - try turning off anything further that you can find (printer ports) although it sounds like youve done this. Toggle the plug-n-play option in your bios. If you have a "Reset Hardware Configuration" or something like that turn it on. Also try a different PCI slot.

personally I have found that systems running chipsets from SIS, nvidia and some VIA (so pretty much all AMD) dont handle those cards very well at all.

--my PBX is run on 2 V8's

&nbsp

jonnytabpni

Posts: 379
Member Since:
2007-03-21

hi there. I can't try a

Mon, 04/28/2008 - 9:35am

hi there.

I can't try a different PCI slot as this proliant server only came with 1 :-(

AFAIK, this board has an intel chipset but I could be wrong. The BIOS doesn't have *any* IO options except to disable the USB and seriel ports (which i've done). I've tried many boot tricks such as acpi noaicp nosmp etc..etc.. (I even tried turning off one core in the BIOS) to no avail.

Do you think I would have this problem with a Sangora Card?

&nbsp

jchuby

Posts: 611
Member Since:
2006-07-20

um have you tried making

Mon, 04/28/2008 - 10:18am

um have you tried making sure echo cancel is off

echotraining =x ... comment this line out with a ;

JChuby
Experienced Trixbox Tech for Hire in Greater NYC
Experienced in Remote Tech Support / Custom DialPlan / Assistance As Well
JChubak@gmail.com or PM me on Trixbox.org Forums

&nbsp

jonnytabpni

Posts: 379
Member Since:
2007-03-21

Quote: um have you tried

Mon, 04/28/2008 - 10:34am

Quote:

um have you tried making sure echo cancel is off

I havn't no however would this really help as the issue is not just with PSTN calls (infact, the damn thing wont pickup/hangup the pstn line).

&nbsp

jonnytabpni

Posts: 379
Member Since:
2007-03-21

ok. when the card is plugged

Mon, 04/28/2008 - 10:49am

ok.

when the card is plugged in, at the start of udev, i get "Uhhuh. NMI received for unknown reason.."

it goes away once i remove the card..

&nbsp

jonnytabpni

Posts: 379
Member Since:
2007-03-21

anyone?

Mon, 04/28/2008 - 2:54pm

anyone?

&nbsp

jahyde

Posts: 2002
Member Since:
2006-06-02

99% chance you would not

Mon, 04/28/2008 - 11:03pm

99% chance you would not have this problem with a Sagoma card

theres a lot of variations of those x100p's, some are WORSE than others, i dont think any are better than others.

--my PBX is run on 2 V8's

&nbsp

jonnytabpni

Posts: 379
Member Since:
2007-03-21

Hi jahyde. THe x100p was an

Tue, 04/29/2008 - 1:22am

Hi jahyde.

THe x100p was an offical ones from x100p.com however I've heard about their problems. I'm hopefully going to try and aquire a Sangoma A200 card.

Will this install without any further ado? Or do I need to do more stuff to get this going?

&nbsp

RevDarkman

Posts: 166
Member Since:
2007-06-08

No prolems with x100p here

Tue, 04/29/2008 - 3:37am

Sorry not to be able to help you specifically - but I've been using a x100p in a SIS based motherboard with an AMD Athlon for a few months now, and apart from having to comment out teh echotrainign line, had no troubles setting it up

&nbsp

SkykingOH

Posts: 9675
Member Since:
2007-12-17

Quote: Sangoma A200

Tue, 04/29/2008 - 8:13am

Quote:

Sangoma A200 card.

Just for timing? Seems like overkill.

We are still having an issue with our HP also. No other machines are effected.

Scott

aka "Skyking"

&nbsp

jahyde

Posts: 2002
Member Since:
2006-06-02

you might as well get the

Tue, 04/29/2008 - 8:23am

you might as well get the card with a module - otherwise it just comes blank - at least then you can have a failover option if internet drops. dont get the echo canceler - its a waste of money in your situation.

--my PBX is run on 2 V8's

&nbsp

jonnytabpni

Posts: 379
Member Since:
2007-03-21

jahyde, yep i'm gonna get

Tue, 04/29/2008 - 8:27am

jahyde, yep i'm gonna get one with a module. skykingoh, yes it does seem a bit much for timing however with the trouble i'm having with this server, i want to get something that is known to work well with trixbox and as a plus, I will have a failover and proper room for expansion

&nbsp

Help! No Sound after x100p install

Comment viewing options

Search

Main

User login

Who's online