Home » Forums » Community Edition » Help

How do I edit the zapata.conf file?

sanderl
Posts: 10
 Member Since:
2008-02-16
Submitted by sanderl on Sat, 02/16/2008 - 12:28pm.

I just set up my first TB with a x100p card. I'm just using my home phone line to test this out. I can call between softphones (Xlite) with no problems. When I attempt to make an outgoing call it says it connects but I don't hear anything and the outgoing call does not go thru. I've been testing this on my cell phone. Also I setup inbound routes to my softphone and it rings but again no audio. I found several threads about changing a line in the zapata.conf file to 800 but I don't know how to edit that file. :)

Thanks,

Sander

‹ Help with VTECH IP8100-2... Upgrade to Asterisk 1.4 on Trix 2.2 ›

&nbsp

kerryg
Posts: 6793
 Member Since:
2006-05-31
nano
Sat, 02/16/2008 - 1:08pm

nano /etc/asterisk/zapata.conf

--

Kerry Garrison
http://www.VoipStore.com - http://3cxbook.com
(888) VOIPSTORE - (888) 864-7786


&nbsp

markwho
Posts: 675
 Member Since:
2006-09-24
Here' another way.
Sat, 02/16/2008 - 4:16pm

You can do kerryg's suggestion (if you're linux savvy) or you can do it the easy way....

An easy way is to go to the trixbox admin screen and under the "Asterisk" drop down menu go to "Config Edit" then scroll down to zapata.conf. double click on zapata.conf, change what you need to change, hit update.

This will get it done so you can have your system operational. Then go back and do the nano thing so you can practice getting linux savvy. ; )


&nbsp

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.