Home » Forums » Community Edition » Help

Sip / Nat issues..

hagfish
Posts: 9
 Member Since:
2006-06-22
Submitted by hagfish on Fri, 06/30/2006 - 9:22am.

I posted this in an existing thread, but it appears to be dead.

To Keefe007.. I've used your settings that you posted for a working teliax sip trunk.. Outbound calls work fine.. Not getting anything inbound though, the call ends immediately when I try, it doesn't even register any activity in the CLI. - I've selected "yes" on allow anonymous inbound sip calls", I've forwarded ports 5060-5082 and 10000 -20000 udp on my firewall to the trixbox machine (i even set it up as a dmz). I've configured my sip_nat.conf file to:

externhost = mydomain.domain.net
externrefresh = 5
localnet = 192.168.2.0/255.255.255.0

Running out of ideas here! Any other tips to get inbound calls working? TIA

‹ Help with Trixbox install on VMware Asterfax install ›

&nbsp

hagfish
Posts: 9
 Member Since:
2006-06-22
Re: Sip / Nat issues.. *fixed*
Fri, 06/30/2006 - 9:22am

So, the big no-no was putting in a caller ID number in the incoming route. I had DID and CallerID as the same number. I left DID obviously, but took out callerid and presto. Hope this helps someone else.

--hag


&nbsp

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.