Anybody using the Digium TDM400 with TB 2.8 with Asterisk 1.6? I am having trouble getting the trunks setup and recognized. Any help would be appreciated.
 
TB 2.8 with Asterisk 1.6 - TDM400
Submitted by gardnersmith on Thu, 07/09/2009 - 11:01am.
Same issue ?
Thu, 07/09/2009 - 4:21pm
Install does not report any errors, but no trunks will show up in the FOP and I cant dial out ?
setup-pstn
--------------------------------------------------------------
Detecting PSTN cards and USB PSTN Devices
--------------------------------------------------------------
Hardware present!
STOPPING ASTERISK
Asterisk ended with exit status 0
Asterisk shutdown normally.
Unable to connect to remote asterisk (does /var/run/asterisk/asterisk.ctl exist?)
Asterisk Stopped
STOPPING FOP SERVER
FOP Server Stopped
Unloading DAHDI hardware modules: done
Loading DAHDI hardware modules:
wct4xxp: [ OK ]
wcte12xp: [ OK ]
wct1xxp: [ OK ]
wcte11xp: [ OK ]
wctdm24xxp: [ OK ]
opvxa1200: [ OK ]
wcfxo: [ OK ]
wctdm: [ OK ]
wcb4xxp: [ OK ]
wctc4xxp: [ OK ]
xpp_usb: [ OK ]
Running dahdi_cfg: [ OK ]
SETTING FILE PERMISSIONS
Permissions OK
STARTING ASTERISK
Asterisk Started
STARTING FOP SERVER
FOP Server Started
Chan Extension Context Language MOH Interpret Blocked State
pseudo from-internal en default In Service
1 from-internal en default In Service
2 from-internal en default In Service
3 from-pstn en default In Service
4 from-pstn en default In Service
[trixbox1.localdomain ~]#
 
I am having the same
Thu, 07/09/2009 - 7:57pm
I am having the same problem......
 
do you have acpi=off in your
Thu, 07/09/2009 - 11:23pm
do you have acpi=off in your grub.conf? try removing it if so....
--
 
Cool thanks that fixed the incoming
Fri, 07/10/2009 - 12:26am
Cool thanks that fixed the incoming it finds my extension now and rings
what I did learn from other postings was that The FOP (flash Panel)is likely not working in this version
so the fact that I am not seeing trunks , or activity when I pick up a line is likely misleading
Outgoing still does not work , set up is very basic it possible the channel and dial may may need changing ??
This device uses zap technology. (Via DAHDI compatibility mode)
channel =1
dial =ZAP/1
-- Starting simple switch on 'DAHDI/1-1'
-- Executing [0413900256@from-internal:1] ResetCDR("DAHDI/1-1", "") in new stack
-- Executing [0413900256@from-internal:2] NoCDR("DAHDI/1-1", "") in new stac k
-- Executing [0413900256@from-internal:3] Wait("DAHDI/1-1", "1") in new stack
-- Executing [0413900256@from-internal:4] Playback("DAHDI/1-1", "silence/1&c annot-complete-as-dialed&check-number-dial-again,noanswer") in new stack
--
--
--
-- Executing [0413900256@from-internal:5] Wait("DAHDI/1-1", "1") in new stac k
-- Executing [0413900256@from-internal:6] Congestion("DAHDI/1-1", "20") in n ew stack
== Spawn extension (from-internal, 0413900256, 6) exited non-zero on 'DAHDI/1- 1'
-- Executing [h@from-internal:1] Macro("DAHDI/1-1", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("DAHDI/1-1", "vw") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("DAHDI/1-1", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("DAHDI/1-1", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("DAHDI/1-1", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("DAHDI/1-1", "1?theend") in new s tack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("DAHDI/1-1", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'DAHDI/1-1' inmacro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'DAHDI/1-1'
-- Hungup 'DAHDI/1-1'
 
Member Since:
2007-11-24