TrixBox 2.4 + mISDN + 2HFC cards + Dataflex Vine 2000 Voip 4BRI Router = cant make outgoing calls.
Submitted by mikr0naut on Tue, 01/29/2008 - 3:56am.
Hi!
Mi old TrixBox system has been working for over a year and now i updated to 2.4 with no issues. My config is related on the topic. I have 2 HFC cards working with mISDN for incoming calls and i make outgoing calls using a SIP provider. But now i want to place outgoing calls trought the HFC cards because I received an offer from my service provider for unlimited calls and i found that after 2 calls, the lines go down. Something I found strange is that misdn-init scan founds that lines are pmtp and if i dont change them to ptp they dont work.
misdn-init.conf
card=1,hfcpci
card=2,hfcpci
te_ptp=1,2
poll=128
dsp_poll=128
dsp_options=0
dtmfthreshold=100
debug=0
Here's when it crashes after some succesful calls:
Tue Jan 29 10:11:50 2008: P[ 0] MGMT: SSTATUS: L1_DEACTIVATED
Tue Jan 29 10:11:50 2008: P[ 1] MGMT: SSTATUS: L2_RELEASED
Tue Jan 29 10:11:50 2008: P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f182
Tue Jan 29 10:11:50 2008: P[ 1] --> lib: RELEASE_CR Ind with l3id:50003
Tue Jan 29 10:11:50 2008: P[ 1] --> lib: CLEANING UP l3id: 50003
Tue Jan 29 10:11:50 2008: P[ 1] --> queue_hangup
Tue Jan 29 10:11:50 2008: P[ 1] * RELEASING CHANNEL pid:15 ctx:from-pstn dad:phonenumbre oad:phonenumber state: CALLING_ACKNOW$
Tue Jan 29 10:11:50 2008: P[ 1] --> * State Down
Tue Jan 29 10:11:50 2008: P[ 1] --> Setting AST State to down
Tue Jan 29 10:11:50 2008: P[ 1] $$$ CLEANUP CALLED pid:15
Tue Jan 29 10:11:50 2008: P[ 1] $$$ Cleaning up bc with stid :10010100 pid:15
Tue Jan 29 10:11:50 2008: P[ 1] --> ec_disable
Tue Jan 29 10:11:50 2008: P[ 1] Sending Control ECHOCAN_OFF
Tue Jan 29 10:11:50 2008: P[ 1] ph_control: c1:2319 c2:0
Tue Jan 29 10:11:50 2008: P[ 1] empty_chan_in_stack: 1
Tue Jan 29 10:11:50 2008: P[ 0] MGMT: SSTATUS: L1_DEACTIVATED
Tue Jan 29 10:11:50 2008: P[ 2] MGMT: SSTATUS: L2_RELEASED
Tue Jan 29 10:11:50 2008: P[ 1] BCHAN: MGR_DELLAYER|CNF pid:15
Tue Jan 29 10:11:57 2008: P[ 0] MGMT: SSTATUS: L1_DEACTIVATED
Tue Jan 29 10:12:04 2008: P[ 0] MGMT: SSTATUS: L1_DEACTIVATED
Tue Jan 29 10:12:11 2008: P[ 0] MGMT: SSTATUS: L1_DEACTIVATED
Tue Jan 29 10:12:18 2008: P[ 0] MGMT: SSTATUS: L1_DEACTIVATED
Tue Jan 29 10:12:24 2008: P[ 0] MGMT: SSTATUS: L1_DEACTIVATED
Tue Jan 29 10:12:31 2008: P[ 0] MGMT: SSTATUS: L1_DEACTIVATED
My ISDN lines are from a Voip provider and I plug my HFC cards into a Vine2000 router. I dont know if i need some special configuration for that. As I said, incoming calls work flawlessly with Bristuff on previous TrixBox version and with mISDN with current 2,4.
Any help would be appreciated. Thanks in advance.
 
TrixBox 2.6.1 + mISDN + 1HFC card = cant make outgoing calls.
Fri, 09/05/2008 - 7:40pm
Hi
I am experiencing the same problem. I can make outgoing calls until the following appears in the log:
P[ 0] MGMT: Short status dinfo 2000000
P[ 1] MGMT: SSTATUS: L2_RELEASED
After this only inbound calls work.
A misdn show stacks gives:
BEGIN STACK_LIST:
* Port 1 Type TE Prot. PTP L2Link DOWN L1Link:UP Blocked:0 Debug:5
immediately after hanging up an inbound call, misdn show stacks gives:
BEGIN STACK_LIST:
* Port 1 Type TE Prot. PTP L2Link UP L1Link:UP Blocked:0 Debug:5
At this point I can make an outbound call. Then some 30 seconds later
P[ 0] MGMT: Short status dinfo 2000000
P[ 1] MGMT: SSTATUS: L2_RELEASED
appears and no more outbound calls can be made.
Any thoughts.
mikr0naut - did you manage to fix your problem. Sounds similar.
 
The problem persists. Here
Sat, 10/04/2008 - 5:18am
The problem persists. Here in Spain there are other users that have my same configuration with provider Jazztel who have simmilar issues.
We are working on it.
 
Member Since:
2007-12-16