Fon-O for CE

It does not look like it would be hard to get the "hardened" version working.

Dump Asterisk* , libpri, zaptel*
add the fon repo's
yum down what you need (or from src you must allow for the kernel kernel-devel to be downloaded)
fix the way asterisk is started (fon asterisk is not started by AMPORTAL)

fix the manger (fon uses a different "manager" than freepbx so there is a port in use error.

Oh yes and there will be some error with the caller setup in chan_sip.c ( chan_sip.c: Checking SIP call limits for device 1000)

Other than that it should "just work"

Freepbx will function fine

Connected to PBXtra Core fon_o_1.2.17 currently running on asterisk1 (pid = 6227)
Verbosity was 0 and is now 3

OK I just loaded up a TB 2.2.4 box

What I did so far...
I uninstall asterisk, libpri, zaptel*

I added a fon.repo file
>>>>>>>>>>>>>>>>>>>>>
[fonbox]
name=fon RPM Repository for CentOS and RHEL
baseurl=http://yum.trixbox.com/centos/4/fonality/
gpgcheck=0
enabled=1

Edited the centos repos to allow the kerne downloading (may not need it if you yum)

I yummed down the pbxtra-core.i386 (I did the addons / sounds from source but yum should work)

I edited the rc asterisk file to stop it from loading asterisk (got to find the right way to correctly load this)

/usr/bin/killall safe_asterisk

I ps -A | grep asterisk tofind the wayward process then I killed it. kill {PIDID}

I then started asterisk and this is where I am at now
I found the context was set to some like sip-ext-??? I changed to from-pstn
but I still have the error
chan_sip.c: Checking SIP call limits for device
manager.c: Unable to bind socket: Address already in use
to deal with

OK I di not do anything else with the box.

Asterisk is running
I did setup one exten and inbound / outbound trunks with vitelity.net

The trunks are up I just have that context issue where it gives the error's

chan_sip.c: Checking SIP call limits for device when I try to place a call
and
Checking SIP call limits for device when a call comes in.

There is also the way in which asterisk is started which needs to be addressed.

FOP does "appear" to be working it is showing my exten I created, I can not login (could be I able not typing the passw0rd fast enought to get it entered..

Freepbx has shown no sign of a problem but I had only created exten conf and que but as I could not make a call...I could not test.

And yes I know Pbx4pros is down, and no I do not need hosting for it, Thanks but no..
;~)

I will look at it later but anything anyone wants to do Please By all means have at it.

I had to shut down the box (rackmount 7 fans in it) it is just to much noise in my small home office (I was told it sounds like a JET engine)

I will find some a little quieter to work on, I know I got an ole JUNKER laying around here.
And I am not talking about my Ole Lady.

What I found was it seems set to compile for 2.6.X kernel. So, I may have better luck with 2.2.4 ISO than the 2.3.0.1 ISO for now.

I thought I saw some chan_sip.c: discussion on the FreePBX forums. Have to take a peek.

Bubba, I feel ya. I had to take a hiatus to the NW Washington Fair.

If anyone get's this working reasonably well an install document would be much appreciated.