i have configured the trixbox with X-lite.i can make out going call.but i cannot get in coming call .
please any one can me give proper solution.my inbound setting ANYDID/ANYCID.
 
Trixbox configure problem
Submitted by malai on Fri, 07/10/2009 - 2:01pm.
Please specific the problem?
Fri, 07/10/2009 - 2:10pm
Please specific the problem? Where is the problem:
extension --> extension?
extension --> zap?
Ricardo Saavedra
FtOCC Admin Tech
 
Trixbox configure problem
Fri, 07/10/2009 - 3:32pm
hi rjsm2co,
i made 3 extension 3000,and their setting below i made.
setting for extension
SIP device
Dspaly name:
Secret:12345
dtmfmode:rfc2833
canreinvite: no
context:from-internal
host: dynamic
type: friend
nat :yes
port:
qualify:
callgroup:
pickupgroup:
disallow:
allow ;
dial :SIP/3000
accountcode:
mailbox:3000@device
Voice mail settings
status:Enable
outbound routes
Add Route
Dail pattern:.,011.
trunk sequence
0 sip/g1
1 zap/go
Trunk details
username=xxxxxxxxx
type=peer
secret=xxxxxxxxxx
pedantic=no
nat=no
insecure=very
host=xxxxxxxxxx
fromuser=xxxxxxxxxx
fromdomain=xxxxxxxxxxxxx
context=ext-did
canreinvite=no
allow=g729&ulaw&alaw
Inbound routes
Any Did/Any Cid
and above are setting necessary i made..
thanks
 
I'd need to see what asterisk is doing.
Fri, 07/10/2009 - 10:56pm
Could you type asterisk -vvvvvvvvvvvvvr in ssh, call your pbx (from a cellphone or something not the pbx), and copy/paste what shows up into a code box on the forum? If it is too excessive, please use a site like paste bin. This will let us know really quick what your issue could be.
 
Member Since:
2009-06-03