The service "Nonoh" nonoh.net offers free outbound SIP dialing in the US, Germany, India, among a ton of other places...
I connected to them PERFECTLY and was able to place calls, but I am stumped on how to setup the trunk to pass callerid, or to setup peer details so it passes a callerid or display name. Based on their faq, I found out they can pass a display name, but it's based on other devices, like the details shown below for the LINKSYS WIP330:
LINKSYS WIP330
Fill in the following settings:
SIP Proxy: fill in nonoh.net
SIP Proxy Port: this is port number 5060
Registrar Address: this is sip.nonoh.net
Registrar Port: this is port number 5060
Expiry Time(sec): this is 3600 seconds
Display name: you can fill-in e.g. your name or telephone number, this name will be displayed in the phone screen of the person you are calling
Registrar Name: fill in your username, this is the username you used for the registration of your nonoh-account
Registrar Password: fill in your password, this is the password you used for the registration of your nonoh-account
Any ideas? It's completely free outbound pstn, which will make me very happy if there is CID passthrough.
Member Since:
2007-02-23