Home » Forums » Community Edition » trixbox CE project bounties

Need Complex Dialplan

pbyeoh
Posts: 5
 Member Since:
2010-05-02
Submitted by pbyeoh on Sat, 07/10/2010 - 4:55pm.

Hello all,

I have a project which requires me to rout calls from ten blocks of sequential numbers i.e. 02081000100 - 02081000200 (each block - 100 numbers) coming in from a telco gateway via Dahdi/SS7 to 10 specific numbers outside the box through two to three SIP trunks (trunk 2 and 3 will be spare capacity/redundant for trunk 1). CLI is crucial here as I need to forward the CLI of the numbers from the blocks of numbers from the SS7 gateway, not the CLI of the originating caller.

I know the above is simple and do-able and I'll probably figure it out eventually but really got no time to do it. This is a short notice - I need the solution before end of next week. Generous bounty is available and payable immediately after successful test of the dialplan. PM me for further details and offer. Many thanks for reading.

Geoffrey

‹ Black list module enhancement Flash player for on hold music ›


SkykingOH
Posts: 9680
 Member Since:
2007-12-17
I have to ask this first, is
Sat, 07/10/2010 - 5:03pm

I have to ask this first, is this an academic project?

If not I may be interested in doing this for you. Are the F-Links configured and do you have point codes assigned?

What equipment are we connecting to?

--

Scott

aka "Skyking"



pbyeoh
Posts: 5
 Member Since:
2010-05-02
This is not academic.
Sat, 07/10/2010 - 5:39pm

Hi Scott,

No, this is a working system. I've got two Sangoma A101 cards on the trixbox connected to two E1 coming out of a Qualcomm BSCI switch. I've posted for help late May and managed to figure it out with some help from Marc @ Sangoma but applying it in real world wasn't easy. I practically have to play through all the wancfg settings before I hit gold. I can now get incoming calls and CLI from the switch, just don't have time to figure out how to write the dialplan as explained above.

Another note, the trixbox is behind a firewall with NAT setup. The traffic is one way only. Calls going to the switch goes to trixbox, trixbox accepts the call, looks at the CLI from the line (not the caller), routs the call to it's assigned outside number through the primary trunk. If primary trunk is unavailable, trixbox will then rout the call to the spare trunks on the list.

I've got the config files if you need to see them.

Thanks,
Geoff



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.