Home » Forums » Community Edition » Trunks

B410p outbound...

syntell
Posts: 3
 Member Since:
2008-10-15
Submitted by syntell on Wed, 10/15/2008 - 12:44am.

Hey,

First of all I want to thank everyone for contributing to this site!

I have setup a Trixbox CE 2.6.1 system and installed the Digium B410p ISDN card (BTW: the card's LED's are flashing red when not connected with a line. Once a line is connected the flashing LED changes to a solid red. And once I receive a call the line goes green: I presume that is right...).

I can receive calls, but I'm unable to make calls... I have tried creating a custom trunk with this string (mISDN/1/$OUTNUM) which i found online.

But still no luck...

Anyone have new ideas?

Thanks in advance!
Jo

‹ Trunk registration keepalive Outbound PSTN calls cut digits ›

&nbsp

mladjoo
Posts: 18
 Member Since:
2007-08-16
Try this...
Wed, 10/15/2008 - 6:36am

I don't have a B410p but a beronet card. The lamp part is normal.
My misdn.conf has the following at the end:
[out]
ports=1,2,3,4
context=from-pstn
msns=*
The trunk has the following string mISDN/1:out/$OUTNUM$
Take a look at what you have in your misdn.conf and modify the string accordingly.
Should work fine.
BR
Mladen


&nbsp

syntell
Posts: 3
 Member Since:
2008-10-15
i came right thx! forgot to
Wed, 10/15/2008 - 6:44am

i came right thx!

forgot to reload the config after any alterations made to the /etc/asterisk/misdn.conf

i just ran /usr/sbin/misdn-init restart

and that fixed it!

:D


&nbsp

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.