Home » Forums » Community Edition » Trunks

Multiple Sipgate trunks problem?

cjensen25
Posts: 2
 Member Since:
2009-07-07
Submitted by cjensen25 on Tue, 07/07/2009 - 1:08pm.

Hi,

I am new to the trixbox scene and I am very impressed with it so far.

I have come across a little problem - If I only have one trunk connected to sipgate the trunk registers fine, however if I put two trunks in neither of them register? (they are both different accounts to sipgate).

It also stops my polycom 320 phone from registering when I have two trunks - it is very strange, I think it is down to the actual ports?

Can somebody please suggest some options?

Here is a snippet of the port 5060

U 192.168.1.3:5060 -> 192.168.1.5:5060
REGISTER sip:192.168.1.5:5060 SIP/2.0.
Via: SIP/2.0/UDP 192.168.1.3;branch=z9hG4bK646839c5B06CBE22.
From: "1001" ;tag=6C132056-1633F113.
To: .
CSeq: 1 REGISTER.
Call-ID: c8d8c35f-af03dd7c-ef552079@192.168.1.3.
Contact: ;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO , MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER".
User-Agent: PolycomSoundPointIP-SPIP_320-UA/2.1.2.0049.
Max-Forwards: 70.
Expires: 120.
Content-Length: 0.
.

#
U 192.168.1.3:5060 -> 192.168.1.5:5060
REGISTER sip:192.168.1.5:5060 SIP/2.0.
Via: SIP/2.0/UDP 192.168.1.3;branch=z9hG4bK646839c5B06CBE22.
From: "1001" ;tag=6C132056-1633F113.
To: .
CSeq: 1 REGISTER.
Call-ID: c8d8c35f-af03dd7c-ef552079@192.168.1.3.
Contact: ;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER".
User-Agent: PolycomSoundPointIP-SPIP_320-UA/2.1.2.0049.
Max-Forwards: 70.
Expires: 120.
Content-Length: 0.
.

#
U 192.168.1.5:5060 -> 217.10.79.23:5060
REGISTER sip:sipgate.co.uk SIP/2.0.
Via: SIP/2.0/UDP 192.168.1.5:5060;branch=z9hG4bK308ef8e8;rport.
Max-Forwards: 70.
From: ;tag=as28800c73.
To: .
Call-ID: 442eb1952446952501a6e74e332584f9@127.0.0.1.
CSeq: 103 REGISTER.
User-Agent: Asterisk PBX 1.6.0.9-samy-r27.
Expires: 120.
Contact: .
Event: registration.
Content-Length: 0.
.

#
U 192.168.1.5:5060 -> 217.10.79.23:5060
REGISTER sip:sipgate.co.uk SIP/2.0.
Via: SIP/2.0/UDP 192.168.1.5:5060;branch=z9hG4bK2e802c14;rport.
Max-Forwards: 70.
From: ;tag=as6189b24b.
To: .
Call-ID: 6d1484b2034dd309690470ce3dce5172@127.0.0.1.
CSeq: 102 REGISTER.
User-Agent: Asterisk PBX 1.6.0.9-samy-r27.
Expires: 120.
Contact: .
Event: registration.
Content-Length: 0.
.

#
U 217.10.79.23:5060 -> 192.168.1.5:5060
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP 192.168.1.5:5060;received=88.107.206.52;branch=z9hG4bK308ef8e8;rport=5060.
From: ;tag=as28800c73.
To: ;tag=fe1721141f05bd30d4b50c70da3ae228.ae7e.
Call-ID: 442eb1952446952501a6e74e332584f9@127.0.0.1.
CSeq: 103 REGISTER.
WWW-Authenticate: Digest realm="sipgate.co.uk", nonce="4a53aa0e85c8d633a2432a4ad5e6ff343213b7bb".
Content-Length: 0.
.

#
U 217.10.79.23:5060 -> 192.168.1.5:5060
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP 192.168.1.5:5060;received=88.107.206.52;branch=z9hG4bK2e802c14;rport=5060.
From: ;tag=as6189b24b.
To: ;tag=fe1721141f05bd30d4b50c70da3ae228.b44c.
Call-ID: 6d1484b2034dd309690470ce3dce5172@127.0.0.1.
CSeq: 102 REGISTER.
WWW-Authenticate: Digest realm="sipgate.co.uk", nonce="4a53aa0e85c8d633a2432a4ad5e6ff343213b7bb".
Content-Length: 0.

‹ DTMF tones are not recognized by Trixbox with Cisco router SIP canreinvite ›

&nbsp

anchor85
Posts: 678
 Member Since:
2006-06-07
Sipgate problem
Tue, 07/07/2009 - 1:59pm

There should be no problem in running multiple SIP trunks into trixbox. I have boxes with 4 or more sipgate.co.uk trunks plus others working fine. Check this thread where the router was identified as the culprit. It also gives examples of sipgate configs for you to check. What ports are you forwarding from your router to the trixbox server? Are these TCP or UDP? Have you searched the web to see if your router has problems with multiple SIP trunks?

--

John
Cat24.net


&nbsp

SkykingOH
Posts: 9680
 Member Since:
2007-12-17
What kind of router are you
Tue, 07/07/2009 - 2:05pm

What kind of router are you using? If it has any kind of SIP helper or agent turn it off.

--

Scott

aka "Skyking"


&nbsp

cjensen25
Posts: 2
 Member Since:
2009-07-07
Thank you for the reply
Wed, 07/08/2009 - 2:52am

Thank you for the reply guys.

I will be honest with you the only port I am forwarding is 5060 - not a range.

I will take a look at the article you posted above and set some port forwarding rules up ( I am relying on p2p at the minute ).

On the top fo your heads what is the ranges I should be forwarding?

The router is a dynamode - fairly cheap thing not sure of the exact model number as I am currently on the road on my laptop.

Thanks again for the replies


&nbsp

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.