need good FWD sip settings for TB2.0

n8zuz
Posts: 19
Member Since:
2006-10-12

I got IAX2 working with FWD but it seems their IAX server is down more often than it is up these days. I have no right to complain as it's free so I won't complain but I can switch to SIP...or so I thought.

I have tried getting a sip trunk working but no luck. I have a DTA310 programmed for FWD and it's working now so their sip server is working (good audio both ways calls in and out) but my TB with fwd sip trunk isn't.

Here's my TB settings:
Trunk Name: fwd
Peer Details:
allow=ulaw
context=from-pstn
disallow=all
dtmfmode=rfc2833
fromdomain=fwd.pulver.com
fromuser=684xxx
host=fwd.pulver.com
insecure=very
qualify=yes
secret=mypass
type=peer
user=phone
username=684xxx

User Context: fwdin

User Details:
allow=ulaw
auth=rsa
context=from-trunk
disallow=all
inkeys=freeworlddialup
secret=mypass
type=user&user

Registation String:
684xxx:mypass@fwd.pulver.com

I can call out with no audio to other FWD users (even if my TB is in the DMZ of my router which makes me think it's not a port issue as I have the ports forwarding correctly for other sip trunks when not in the dmz). I cannot receive a call in my TB from FWD.

Any help is much appreciated.
Thanks,
Jeff



bubbapcguy
Posts: 3774
Member Since:
2006-06-02
Re: need good FWD sip settings for TB2.0

They look to be correct...only thing is I do not have this in mine...
fromdomain=fwd.pulver.com

I have a cisco ATA setup with two FWD numbers and I have a third one on a Asterisk box

If you need to test let me know I can give a FWD to call into a PBX and use the echo test



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.