Hi Everyone,
I have got a trixbox 2.8 setup. I have 4 phones (polycom ip 330) that all talk to each other so i can make internal calls etc which is great. In our office we have 2 PSTN lines which i need to connect in to make and recieve calls. We bought a A400 card with 2 x FXO and 2 x FXS modules. Installed it, installed the power and get all the lights on the back.
My problem lays when i try to set it all up. I use putty and type setup-pstn, it all goes through and i get this
--------------------------------------------------------------
Detecting PSTN cards and USB PSTN Devices
--------------------------------------------------------------
PCI Hardware found
Hardware present!
Notice: Configuration file is /etc/dahdi/system.conf
line 0: Unable to open master device '/dev/dahdi/ctl'
1 error(s) detected
STOPPING ASTERISK
STOPPING FOP SERVER
FOP Server Stopped
Empty configuration -- no spans
Empty configuration -- no spans
Stopping Dahdi service...
Unloading DAHDI hardware modules: done
Starting Dahdi service...
Loading DAHDI hardware modules:
wct4xxp: [ OK ]
wcte12xp: [ OK ]
wct1xxp: [ OK ]
wcte11xp: [ OK ]
wctdm24xxp: [ OK ]
wcfxo: [ OK ]
wctdm: [ OK ]
wcb4xxp: [ OK ]
wctc4xxp: [ OK ]
xpp_usb: [ OK ]
Running dahdi_cfg: [ OK ]
Restarting Asterisk...
SETTING FILE PERMISSIONS
Permissions OK
STARTING ASTERISK
Asterisk Started
STARTING FOP SERVER
FOP Server Started
No such command 'dahdi show channels' (type 'help dahdi show' for other possible commands)
- i seem to have 2 errors, one up the top there and the no such command. i have spent hours and hours look through posts to find the answer but i cant seem to get anything. I have run all sorts of commands and it can see the PCI card and the modules on it but just wont let me connect. I am starting to pull my hair out! if anyone can help that would be great~!
Member Since:
2011-02-27