Hi all,
I need to figure out how to redirect incoming lines to different extensions. We have 6 incoming lines and would like the following to happen:
Line 1 and Line 2 to ring on extension 211
Line 3 and Line 4 to ring on extension 311
Line 4 and Line 5 and Line 6 to ring on extension 411
Any ideas how to do this?
RGDS
The Zap channel DID module provides routing services for Zap/DAHDI circuits that do not supply DNIS. The lines must be in the from-zaptel context.
Scott
aka "Skyking"
That sounds so easy, but as soon as I add the DID to the Inbound Route, I stop receiving calls on the ZAP Channel.
Other discussions have mentioned changing a line in "zapata.conf" like mentioned here to "from-zaptel" but I cannot find this file any where.
I found it & Fixed it.
I'm Running trixbox CE 2.8.0.1
In Admin mode hover over PBX and click Config File Editor
in the /etc/asterisk dirrectory find dahdi-channels.conf
Change the lines "context=from-pstn" to "context=from-zaptel"
Go back to PBX Settings -> Zap CHannel DIDs
Create the DIDs you need
Go to inbound routres
Create a Inbound Routes for the DIDs you created
and you are done !!!
Member Since:
2009-05-22