I have been trying to get this to work for 4 days now and still can't make it work...
I have a Sangoma A101 connected to a Norstar 0x32 MICS DTI T1 card, the connection come up and I get green lights on both ends but can't make any calls between the two, Norstar tells me there are no lines free (or not in service if i select any lines off the T1) and the trixbox tells me all lines are busy (shows congestion when i run asterisk -rvvv)
Here is my config
***************zapetl.conf*************
#autogenerated by /usr/sbin/wancfg_zaptel do not hand edit
#autogenrated on 2009-07-07
#Zaptel Channels Configurations
#For detailed Zaptel options, view /etc/zaptel.conf.bak
loadzone=us
defaultzone=us
#Sangoma A101 port 1 [slot:8 bus:2 span:1]
span=1,0,0,esf,b8zs
e&m=1-24
************zapata.conf****************
[trunkgroups]
[channels]
context=from-pstn
signalling=em_w
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3
immediate=yes
#include zapata_additional.conf
#include zapata-channels.conf
***********zapata_additional.conf*******************
***********zapata-channels.conf*********************
; Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
callerid=asreceived
;Sangoma A101 port 1 [slot:8 bus:2 span:1]
context=from-zaptel
group=1
signalling=em_w
channel => 1-24
Norstar is setup with DIT T1 programmed up as TC1 in KSU, lines 001-024 are all set to E&M Winkstart, ESF, b8zf
Please, any help would be great... I have tried many different configs, FXS, FX0 config on the T1 and nothing seems to work, i checked my crossover cable several times and made a few new ones, same problems...
Member Since:
2008-02-19