Home » Forums » trixbox Pro » trixbox Pro General Information

Newbie

schleid
Posts: 32
 Member Since:
2011-01-25
Submitted by schleid on Mon, 01/31/2011 - 11:44pm.

Hi,
I am totally new to asterix so I need a lot of help from you guys who are willing to help.
1) Need to configure my pstn trunk to dial out. I have already setup the Outbound route but still can't make call out.
So please help me find the right configuration for my outbound route and pstn
I got "Write fail" each time I am trying to save something in file etch\hosts
2) Plesae tel me how to setup the time

Thank you!!

‹ New Development? 3 Problems: Usernames not being accepted, cisco phones not creating config files, missed calls showing 12:00 AM ›


stanjohn
Posts: 73
 Member Since:
2011-01-06
Post your log: PBX > PBX
Tue, 02/01/2011 - 9:02am

Post your log: PBX > PBX Settings > Tools > Support Asterisk Logfiles and file and directory names need to be exact "etch\hosts" not equal to etc/hosts .

Stanley



stanjohn
Posts: 73
 Member Since:
2011-01-06
Time is set by a pool of
Tue, 02/01/2011 - 9:10am

Time is set by a pool of time servers so it should set it self if connected to the internet. The install program asked your time zone to get that. Do you need to set the time zone or do you have a internet connection ? Or are the minutes correct and the hours off ?

Stanley



schleid
Posts: 32
 Member Since:
2011-01-25
The hours are off.
Tue, 02/01/2011 - 11:28am

The hours are off.



schleid
Posts: 32
 Member Since:
2011-01-25
Hi Stanley, Thank you for
Tue, 02/01/2011 - 11:35am

Hi Stanley,

Thank you for your help, I am trying to get broadvoice to work with asterix and I also need to find a way to configure my pstn trunk to work with my landline.
I have a few questions?
1) What is the difference between the Dialing rules in the Trunk and the Dial Pattern in the OutBound Route.
2) Do I have to configure dialing rules for in both trunk and outbound Route.
Please help me setup the broadvoice trunk.

Schleid



stanjohn
Posts: 73
 Member Since:
2011-01-06
1) This is way over my head
Tue, 02/01/2011 - 12:24pm

1) This is way over my head but they could be the same or different depends on what you want. Dial patterns are used to select or reject as well as fix/modify the dialed number. They can be use to direct traffic to the lowest cost path available and even to exclude some things like 900 numbers or certain country codes. Dial patterns are at the top of my list to learn as they are a key to many functions.

http://www.freepbx.org/support/documentation/howtos/howto-route-d...

2) http://www.freepbx.org/support/documentation/howtos/howto-setting...



stanjohn
Posts: 73
 Member Since:
2011-01-06
Found this using the search
Tue, 02/01/2011 - 12:48pm

Found this using the search box on the top left of this page:
http://fonality.com/trixbox/forums/trixbox-forums/help/how-change...

The other two links to freepbx google found for me.

Stanley



stanjohn
Posts: 73
 Member Since:
2011-01-06
Which hardware are you using
Tue, 02/01/2011 - 12:55pm

Which hardware are you using to connect the plain old phone line ? FXO pci card if so which one ? ATA adapter ?



schleid
Posts: 32
 Member Since:
2011-01-25
About the hardware for PSTN
Tue, 02/01/2011 - 7:30pm

I don't really know, I can see from my trunk page names like ZAP/g0 and I know that there is a pci card inside the pc. Whenever I configure something and try to make a call the voice response is " All trunks are busy try your call again later" Why do I have this response.
If I leave the dial rules in the trunk configuration page doesn't it mean that all numbers are allowed?
My scenario is :
User must dial 90 to get to the pstn trunk so in the dial pattern in the outbound route I put it like this 90|.
and I live the dialing rules blank in the pstn config page.
AM I RIGHT? HELP PLEASE



schleid
Posts: 32
 Member Since:
2011-01-25
About settings for broadvoice
Tue, 02/01/2011 - 7:48pm

Stanjohn thank you for the help unfortunately my broadvoice trunk is not online and is not registered. Please explain what does it mean when the server show IP TRUNK ONLINE : 1



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.