Hi,
Probably a question for the Aastra guys.
What is the PoE Class that the Aastra handsets report at and what is the actual power drain, we are running out of power on some of our PoE switches.
http://en.wikipedia.org/wiki/Power_over_Ethernet
Thanks Justin
All the phones (that support PoE) advertise themselves as class 0 devices, but the power usage varies per model. The figures below, is the maximum power usage under worst case scenarios.
| Phone | Power Usage |
|---|---|
| 9112i | 4W |
| 9133i | 4W |
| 480i | 4.5W |
| 480iCT | 5W |
| 51i | 3.5W |
| 53i | 4W |
| 55i | 5W |
| 57i | 5.5W |
| 57iCT | 5.7W |
If you've got expansion consoles connected to the phones, then you need to add in power usage for each console. The table below shows the power usage of individual consoles, so you need to multiple it by the number of consoles you have and then add it the phone model number above.
| 536M Console | 0.3W |
| 560M Console | 2.2W |
Sorry, but I don't have figures for the 9143i, 9480i or 9480iCT. However they should be roughly the same as the 9133i, 480i and 480iCT respectively.
Copyright © 2011 Fonality
Fonality and trixbox are trademarks of Fonality. Trademark Policy. Privacy Policy.
Asterisk is a trademark of Digium, Inc. Fonality and trixbox are not affiliated with, nor endorsed by Digium, Inc.
Member Since:
2007-01-09