Installed Trixbox ver 2.8.0.4 and perfomed the rpm updates as per link http://wiki.sangoma.com/trixbox-install#rpm_install
used these rpm
wanpipe-modules-2.6.18-164.11.1.el5-3.5.18-0.i686.rpm
wanpipe-util-3.5.18-0.i686.rpm
asterisk16-devel-1.6.0.26-1_trixbox.i386.rpm
as described in the link, but I can not get the A200 card to work ? the card/ system can see if the phone line is connected or disconnected reports on the console, but I can not make any out going or incoming calls to work. All help needed as I am very new to this, how do I confirm which group the A200 card is in, g0 comes up when I configure the zap trunk. I have only a 2 analog modual in the card, but this is to use 8 analog phone lines in the UK if I can get it working.
many thanks
Member Since:
2011-02-14