Home » Forums » Vendor Forums - Non-Certified » Rhino Equipment

I am missing caller id on most incoming calls ...

augustynr
Posts: 104
 Member Since:
2006-05-31
Submitted by augustynr on Thu, 03/12/2009 - 7:52pm.

I have tried what rhino has on its web site with no changes in outcome.
Any pointers?

# dmesg | grep rcbfx
rcbfx 1: Rhino PCI BAR0 50100000 IOMem mapped at f89e6000
rcbfx 1: Waiting for response from card .........
rcbfx 1: Firmware Version 1.e
rcbfx 1: Firmware File Version is ff.ff
rcbfx 1: Firmware Uprgrade In Progress -- Do Not Interrupt!!
rcbfx 1: New Firmware is 75ceh bytes - loading into 800h to 7dceh
rcbfx 1: All blocks transfered and acked
rcbfx 1: Hardware version 10
rcbfx 1: G168 07 08 DSP Loader file size = 170 App file size = 48414
rcbfx 1: G168 DSP Ping DSP Version 106
rcbfx 1: G168 DSP Active and Servicing 4 Channels - f
rcbfx 1: Starting DMA
rcbfx 1: Spotted a Rhino: Rhino RCB8FXX (2 modules)

‹ Rhino with 2.8 Beta No incomming and outgoing calls ›

&nbsp

augustynr
Posts: 104
 Member Since:
2006-05-31
I upgraded the card with no
Thu, 03/12/2009 - 8:25pm

I upgraded the card with no improvements still no callerid:

Open Source Line Echo Canceller Installed
zaptel: no version for "oslec_echo_can_traintap" found: kernel tainted.
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.4.11
Zaptel Echo Canceller: OSLEC
Zaptap registered 'sample' char driver on major 33
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low) -> IRQ 58
rcbfx 1: Rhino PCI BAR0 50100000 IOMem mapped at f887e000
rcbfx 1: Waiting for response from card .........
rcbfx 1: Firmware Version 2.0
rcbfx 1: Firmware File Version is 2.0
rcbfx 1: Hardware version 10
rcbfx 1: G168 07 08 DSP Loader file size = 170 App file size = 48414
rcbfx 1: G168 DSP Ping DSP Version 106
rcbfx 1: G168 DSP Active and Servicing 4 Channels - f
rcbfx 1: Starting DMA
rcbfx 1: Spotted a Rhino: Rhino RCB8FXX (2 modules)
Registered tone zone 0 (United States / North America)
r8168: eth0: link up
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
no echo canceller being monitored - make a new call


&nbsp

augustynr
Posts: 104
 Member Since:
2006-05-31
zapata.conf
Thu, 03/12/2009 - 8:28pm

This is my zapata.conf, am I missing something?

[trunkgroups]

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=no
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1

callerid=asreceived
cidsignalling=bell
cidstart=ring
sendcalleridafter=0

;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3

immediate=no

#include zapata_additional.conf
#include zapata-channels.conf


&nbsp

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.