Beginning with the release of trixbox 2.2, if you are using a Rhino card, you will need to go to the Package Manager and install the Rhino package. This will setup the startup files and all the drivers.
 
trixbox 2.2 with Rhino Equipment
Submitted by kerryg on Thu, 05/03/2007 - 9:01am.
The trixbox Yum repo appears
Tue, 11/06/2007 - 10:13am
The trixbox Yum repo appears to be missing our packages......
To install Rhino Drivers do the following,
Connect directly to a console or open an SSH connection to your box.
type: uname -r
This will tell you if you are using an smp kernel.
Download the appropriate package:
2.6.9-34.0.2.ELsmp:
wget ftp://ftp.rhinoequipment.com/Drivers/Beta/RPMS/trixbox/CE/2.2/rhi...
2.6.9-34.0.2.EL:
wget ftp://ftp.rhinoequipment.com/Drivers/Beta/RPMS/trixbox/CE/2.2/rhi...
You can install the drivers with rpm
rpm -ivh rhino-2.6.9-34.0.2.EL*.rpm
--
 
Our latest RPM's have been
Tue, 11/06/2007 - 2:40pm
Our latest RPM's have been forwarded appropriately and the normal 2,2 install method should work shortly...
--
 
Beta
Tue, 11/06/2007 - 2:50pm
James,
Just going off the names of the rpms, are these beta drivers considered stable enough for a production machine? Are they recommended to be installed on all versions of 2.2 - 2.3?
Thanks,
Doug
www.vbcnetworks.com
 
These are stable and ready
Tue, 11/06/2007 - 3:04pm
These are stable and ready for release. the beta will be removed shortly but there is a process. these drivers are in full production by many of our customers.
--
 
Thanks James
Tue, 11/06/2007 - 3:05pm
This issue seems to be
Wed, 11/07/2007 - 9:28am
This issue seems to be resolved for 2.2.x
Should work in 2.3.x shortly
Thanks Kerry for taking the ball on this...
James
--
 
Rhino Channel Banks
Tue, 11/13/2007 - 3:43am
James this drivers applies to channel banks or only for cards? I am having troubles with outgoing calls with a Sangoma A102D with 2 Rhino 1 24xFXO and 1 24xFXS channel bank.
Inbound calls goes well but when an outgoing call is dialed when the other phone is picked up, the call is hunged up.
Any ideas? I've tried changing rx gain, making changes on zapata's files such as
busydetect, busycount, callprogress, etc.. but nothing worked.
I am in Uruguay, I also tried defaultzone=us es ..
I have another Asterisk (older version) with a TDM400P and it works with defaultzone=us, so I don 't think that is an indication problem.
Could It be the Rhino or Sangoma drivers?
The drivers for Sangoma is wanpipe-3.2.1
Thanks
Dikran
 
No all driver releases are
Wed, 01/02/2008 - 8:49am
No all driver releases are not for the Channel Banks. This actually sounds like you may have reverse polarity. Try setting your channel bank to Revp for all channels. That should do the trick.
 
RXT1 and 31 channels E1 PRI Service
Wed, 01/30/2008 - 9:57pm
I´m having these messages from the box don you guys thinks could be the carrier??? I have the same configuration on other boxes and they are working fine. This is a new service and a new box. what do you think ???
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Exception on 22, channel 11
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Got event Alarm(4) on channel 11 (index 0)
Jan 30 22:29:40 VERBOSE[4236] logger.c: Write to 42 failed: Unknown error 500
Jan 30 22:29:40 VERBOSE[4236] logger.c: Short write: 0/15 (Unknown error 500)
Jan 30 22:29:40 WARNING[4236] chan_zap.c: Detected alarm on channel 11: Recovering
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: disabled echo cancellation on channel 11
Jan 30 22:29:40 DEBUG[4236] channel.c: Scheduling timer at 0 sample intervals
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Set option AUDIO MODE, value: ON(1) on Zap/11-1
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Hangup: channel: 11 index = 0, normal = 22, callwait = -1, thirdcall = -1
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: disabled echo cancellation on channel 11
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Set option TDD MODE, value: OFF(0) on Zap/11-1
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Updated conferencing on 11, with 0 conference users
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: Set option AUDIO MODE, value: OFF(0) on Zap/11-1
Jan 30 22:29:40 DEBUG[4236] chan_zap.c: disabled echo cancellation on channel 11
Jan 30 22:29:40 NOTICE[3566] chan_zap.c: PRI got event: Alarm (4) on Primary D-channel of span 1
Jan 30 22:29:40 WARNING[3566] chan_zap.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
Jan 30 22:29:40 DEBUG[4244] chan_sip.c: update_call_counter(115) - decrement call limit counter
Jan 30 22:29:40 DEBUG[4244] chan_sip.c: Acked pending invite 102
Jan 30 22:29:40 DEBUG[4244] chan_sip.c: Stopping retransmission on '1f1837705a5e343619ebc2723686a622@172.100.0.210' of Request 102: Match Found
Jan 30 22:29:40 DEBUG[4244] app_dial.c: Exiting with DIALSTATUS=CANCEL.
Jan 30 22:29:40 DEBUG[3572] chan_sip.c: Stopping retransmission on '1f1837705a5e343619ebc2723686a622@172.100.0.210' of Request 102:
Thanks in advance !!!
 
Update to drivers?
Sat, 07/26/2008 - 3:11pm
Hi,
I have a Rhino R1T1 card that I'd like to use with a Trixbox 2.2. I see the RPM repository at
ftp://ftp.rhinoequipment.com/Drivers/RPMS/trixbox/CE/2.2
Aside from the SMP or non-smp versions, which one do I pick? Some of the later numbers have a older date than others.
Thanks!
 
I do this but I get
Fri, 09/05/2008 - 7:14am
I do this but I get this
[telecorp.local /]# wget ftp://ftp.rhinoequipment.com/Drivers/Beta/RPMS/trixbox/CE/2.2/rhi...
--07:12:50-- ftp://ftp.rhinoequipment.com/Drivers/Beta/RPMS/trixbox/CE/2.2/rhi...
=> `.listing'
Resolving ftp.rhinoequipment.com... 74.54.1.27
Connecting to ftp.rhinoequipment.com|74.54.1.27|:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /Drivers/Beta/RPMS/trixbox/CE/2.2/rhino-2.6.9-34.0.2.EL-2.2.1beta2-1.i386.rpm ...
No such directory `Drivers/Beta/RPMS/trixbox/CE/2.2/rhino-2.6.9-34.0.2.EL-2.2.1beta2-1.i386.rpm'.
unlink: No such file or directory
What cant I do to resolve the problem
 
Member Since:
2006-05-31