################### LogWatch 5.2.2 (06/23/04) ####################
Processing Initiated: Sun Aug 26 04:02:02 2007
Date Range Processed: yesterday
Detail Level of Output: 0
Logfiles for Host: asterisk1.local ################################################################
--------------------- Cron Begin ------------------------
**Unmatched Entries**
STARTUP (V5.0)
STARTUP (V5.0)
STARTUP (V5.0)
---------------------- Cron End -------------------------
--------------------- Kernel Begin ------------------------
WARNING: Kernel Errors Present
wanpipe1: Error: Card Critically...: 2 Time(s)
---------------------- Kernel End -------------------------
Card: A101D
[root@asterisk1 ~]# wanrouter hwprobe
-------------------------------
| Wanpipe Hardware Probe Info |
-------------------------------
1 . AFT-A101-SH : SLOT=2 : BUS=6 : IRQ=193 : CPU=A : PORT=1 : HWEC=32 : V=31
Card Cnt: S508=0 S514X=0 S518=0 A101-2=1 A104=0 A300=0 A200=0 A108=0 A056=0
[root@asterisk1 ~]#
WAN Router Configurator(c) 1995-2003 Sangoma Technologies Inc.
* Reading section [devices]...
* Shutting down WAN device wanpipe1 ...
Shutting down device: wanpipe1
WAN Router Configurator(c) 1995-2003 Sangoma Technologies Inc.
* Reading section [devices]...
* Shutting down WAN device wanpipe1 ...
Shutting down device: wanpipe1
WAN Router Configurator(c) 1995-2003 Sangoma Technologies Inc.
* Reading section [devices]...
* Shutting down WAN device wanpipe1 ...
Shutting down device: wanpipe1
WAN Router Configurator(c) 1995-2003 Sangoma Technologies Inc.
* Reading section [devices]...
* Shutting down WAN device wanpipe1 ...
Sat Aug 25 10:40:17 EDT 2007: starting WAN router
Loading driver wanpipe ... ok
Starting up device: wanpipe1
WAN Router Configurator(c) 1995-2003 Sangoma Technologies Inc.
* Parsing configuration file /etc/wanpipe/wanpipe1.conf ...
* Reading section [devices]...
* Reading section [wanpipe1]...
* Reading section [interfaces]...
* w1g1 to used by TDM_VOICE
* Reading section [w1g1]...
* Configuring device wanpipe1 (no description)
* Setting CARD_TYPE to AFT
* Setting S514CPU to A
* Setting COMMPORT to PRI
* Setting AUTO_PCISLOT to NO
* Setting PCISLOT to 2
* Setting PCIBUS to 6
* Setting FE_MEDIA to T1
* Setting FE_LCODE to B8ZS
* Setting FE_FRAME to ESF
* Setting FE_LINE to 1
* Setting TE_CLOCK to NORMAL
* Setting TE_REF_CLOCK to 0
* Setting TE_HIGHIMPEDANCE to NO
* Setting LBO to 0DB
* Setting FE_TXTRISTATE to NO
* Setting MTU to 1500
* Setting UDPPORT to 9000
* Setting TTL to 255
* Setting IGNORE_FRONT_END to NO
* Setting TDMV_SPAN to 1
* Setting TDMV_DCHAN to 24
* Setting TDMV_HWEC_PERSIST_DISABLE to YES
* Configuring channel w1g1 (no description). Media address:
* Setting ACTIVE_CH to ALL
* Setting TDMV_ECHO_OFF to NO
* Setting TDMV_HWEC to YES
wanpipe1: Configuring Echo Canceller device... Searching image for 32 channels...
.Done!
End of WANPIPE /var/log/wanrouter
~]# cat /usr/local/sbin/wancfg_zaptel/tmp_cfg/wanpipe1.conf
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec 6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
# by /usr/local/sbin/setup-sangoma program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 2
PCIBUS = 6
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 24
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
[root@asterisk1 ~]#
Member Since:
2007-06-26